Nylon Hobby Clamps 6 x 50m / 3 x 75mm

A set of Model Craft nylon modeling clamps for holding glued parts until the glue has dried.

Manufacturer Model Craft
Product EAN8591111701136

Responsibility details are not available.

10.36 €
8.56 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Model Craft nylon modeling clamps (set)

This set of sprung nylon clamps (hobby clamps) serves to hold glued parts firmly while the glue dries. The light plastic clamps hold the parts in the correct position without pressing marks into soft plastic or scratching it. They are a modeler's third hand when gluing larger joints, where holding by hand is not enough. The even pressure of a clamp also makes sure the seam stays closed along its whole length and that the joint does not dry half open.

Use

  • Holding and pressing glued parts together until the glue has dried
  • Holding fuselage halves, decks and other larger joints
  • Clamping a part to the work surface or to a jig
  • Holding material while sanding and cleaning up

Who it is for

A practical helper for modelers and hobbyists alike, wherever parts need to be clamped firmly and yet gently while being glued, rather than held in the hand the whole time.

The clamps are made of plastic, so do not overload them and do not use them on hot or sharp edges.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

They hold glued parts firmly together in the correct position until the glue has dried. They take the place of a third hand and make sure the joint does not end up twisted or half open.

Nylon jaws are gentler on soft plastic than metal clamps, but do not overload a clamp all the same, so that no pressure mark is left on a delicate part.

Above all for holding larger joints (fuselage halves, decks), but also for holding a part while sanding and cleaning up.

Last seen

Model CraftPCL3000

Nylon Hobby Clamps 6 x 50m / 3 x 75mm

A set of Model Craft nylon modeling clamps for holding glued parts until the glue has dried.
In stock
10.36 €
Síra HobbyCS05

ČSLA kamuflážní barva - světle zelená

CSLA camouflage paint, light green is an acrylic modeling paint from the Czech manufacturer Sira Hobby in the authentic light green shade of the Czechoslovak People's Army, thinnable with water.
In stock
2.36 €
Model CraftPXU0450

Tweezernose Pliers

Pliers with tweezer jaws from Model Craft have very fine smooth jaws in the shape of tweezers, which leave no mark on the surface and still hold the force needed to bend wire.
In stock
28.76 €
MineshimaMNS-RN01

Nokoru Nipper RN01

Mineshima Nokoru Nipper RN01 are modeling nippers that deliberately leave a small sprue gate remnant in order to protect the part from tearing and from marks left by nipping.
In stock
8.76 €
MineshimaMNS-D10

Side Cutters D10

Mineshima Side Cutters D10 are side cutters for separating plastic parts from the sprues when building models.
In stock
11.96 €
Model CraftPSC1002/C

Mini Snips Large Curved

Large curved mini snips from Model Craft combine a longer body for a sure grip with a curved blade that makes it possible to cut close above the surface of a model. The overall length is about one hundred and fifteen millimeters.
In stock
11.16 €
Model CraftPSC1002

Mini Snips Large Straight

Large straight mini snips from Model Craft are precise spring-loaded snips with straight blades and a longer body, which give a steady straight cut in decals, tape and films.
In stock
11.56 €
Model CraftPPL6900

Angled Cutter for Plastic

Model Craft Angled Cutter for Plastic are angled sprue nippers for plastic, used to separate parts from the sprues of models. The angled head reaches into tight spots as well.
In stock
21.16 €
Model CraftPPL5015

Micro Snips

Model Craft Micro Snips mini scissors with a spring — fine sharp scissors for cutting thread, cord, rigging and tape with a clean cut.
In stock
5.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.