A styrene section in the shape of the letter H, 2.50 x 2.50 x 350 mm, by AK Interactive, with 4 pieces in the package according to the name. Stock for columns, lattice structures and frames.
Responsibility details are not available.
A section with a symmetrical H-shaped profile of 2.50 x 2.50 mm and a length of 350 mm; according to the name there are 4 pieces in the package. The material is styrene. It is stock for scratchbuilding and for modifying models, that is material for further work rather than a finished part. Within the range it is a medium to heavier size that already bears a structure of its own and yet is still easy to cut with hand tools.
A heavier section is cleaner to score along both flanges separately and only then to snap, as otherwise the edge risks being crushed. Level the ends with a file and check them on a flat surface; with load-bearing elements every deviation tells across the whole structure. Styrene is joined with a thin cement for polystyrene that is drawn into the joint by capillary action; load the joints as little as possible and let them cure. Build a larger structure in sub-assemblies and join them only once they have dried. For painting, a light sanding and a thin base are enough, and a wash will then bring out the inner corners between the web and the flanges.
For builders of dioramas and of industrial and railway station scenes, and for modelers who design their own load-bearing structures. A design of your own and experience of cutting and gluing plastic are assumed.
When cutting, work on a mat and protect your eyes, and clear the offcuts away safely.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!