Four polystyrene I-beam sections of 1.50 x 1.20 millimeters in section and 350 millimeters long, 1.4 meters of material in all for building parts of your own.
Responsibility details are not available.
The package holds four beam sections in polystyrene. Each of them measures 1.50 x 1.20 millimeters in section and is 350 millimeters long, so you get 1.4 meters of material in all. It is stock for building parts of your own, not a finished model nor a set for a particular kit. The shape of the section, that is two flanges joined by a web in the middle, is called an I section or an H section in modeling depending on how the beam is turned; it is the same material.
A beam is the basic element everywhere a structure is meant to be visible on a model: lattice masts and bridges, crane jibs, chassis frames, hall trusses, shelters, railings and ramps in a diorama. The section is the same along the whole length, so dozens of identical parts can be cut from one piece, which with repeated elements is faster and more accurate than putting them together from flat strips. The thin section of 1.50 x 1.20 millimeters suits smaller structures rather than large ones.
Divide a section by scoring it against a ruler several times with a sharp blade and then snapping it; with a saw the thin flanges fray easily. Sand the end with fine sandpaper so that it seats flat. Polystyrene is joined by a solvent cement for plastic models, which welds the joint, or by cyanoacrylate glue where the position needs fixing quickly. Before painting, wash the surface, degrease it and prime it.
Glue, paints and tools are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!