Double-Action Airbrush Fengda BD-135 with Nozzle 0,3 mm

Fengda BD-135 (double-action airbrush, 0.3 mm nozzle)

A double-action airbrush, an airbrush, from Fengda with a 0.3 mm nozzle and a gravity-feed cup on top. Double-action means that the trigger controls the air supply (pressing down) and the amount of paint (pulling back) separately, so you have full control of the spray pattern from fine lines to full coverage. The 0.3 mm nozzle is a universal choice suited to most modeling tasks: primer, covering coats and finer transitions.

Use

• Connect the airbrush to a compressor with a hose and set the pressure roughly according to the type of paint and the pattern you need.
• Thin the paint to a suitable consistency, because paint that is too thick clogs a 0.3 mm nozzle.
• Spray with a steady motion from a constant distance, in thin coats.
• After spraying, flush the airbrush thoroughly with the appropriate thinner so that the nozzle and the needle do not clog.

Who it is for

For modelers from beginners to advanced builders who want a universal double-action gun for painting models, figures and accessories.

Wear a respirator and ventilate while spraying, and take care when thinning solvent-based paints. Keep out of the reach of children.