The Mineshima 2.8 mm drill bit is a single modeling bit suited to seats for pins, dowels and joints meant to hold a model together even without glue.
Responsibility details are not available.
A single drill bit from Mineshima, the Japanese maker of modeling tools. The diameter of 2.8 millimeters is given in the designation of the item, so you can easily pair it with the wire or the profile that is to fit into the hole.
A hole does not have to be only a hole in a surface. A pair of coaxial holes and a piece of wire turn a loosely placed part into a firm joint that can be taken apart for painting and put back together. The mounting of a model to a stand, wing pins or the reinforcement of a glued joint that glue alone would not be enough for are all solved the same way. A cast detail that has been drilled off and should be separate on the model can be replaced like this too.
The drill bit is a tool with a sharp point. Store it out of the reach of children and protect your eyes while drilling.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!