DSPIAE

476 products
Product filtering
up to €
DSPIAEDS-XSP-1500

XSP-1500 Adhesive Sandpaper #1500 (30 pcs)

DSPIAE self-adhesive abrasive paper in 1500 grit, 30 pieces . It sticks to a block or to a file, so you can sand precisely.
In stock
3.56 €
DSPIAEDS-XSP-1200

Adhesive Sandpaper #1200 (30 pcs)

DSPIAE self-adhesive sandpaper, 1200 grit, 30 pieces in the package. The 75 x 25 mm strips have an adhesive back, they are stuck onto a sanding plate or a sanding pad and peeled off after the work.
In stock
3.56 €
DSPIAEDS-XSP-1000

Adhesive Sandpaper #1000 (30 pcs)

DSPIAE self-adhesive sandpaper, 1000 grit, 30 pieces in the package. The strips have an adhesive back, they are stuck onto a sanding plate or a sanding pad and peeled off after the work.
In stock
3.56 €
DSPIAEDS-PT-SP06

PT-SP06 Acrylic Sanding Pad Set - Red #600 (3 pcs)

A set of three DSPIAE sanding pads, 600 grit, in red . The finer grade for finishing flat surfaces.
In stock
3.56 €
DSPIAEDS-PT-SP02

PT-SP02 Acrylic Sanding Pad Set - Yellow #280 (3 pcs)

A set of three DSPIAE sanding pads, 280 grit, in yellow . The coarser grade for taking material down and leveling putty.
In stock
3.56 €
DSPIAEDS-PT-AR-03

PT-AR-03 Right Side Airbrush Holder

DSPIAE airbrush holder for the right side holds the spray gun between individual steps. Meant to be mounted on the right of the working place.
In stock
2.76 €
DSPIAEDS-PT-AR-02

PT-AR-02 Left Side Airbrush Holder

DSPIAE airbrush holder for the left side holds the spray gun between individual steps. Meant to be mounted on the left of the working place.
In stock
2.76 €
DSPIAEDS-PT-AR-01

PT-AR-01 Large Airbrush Holder

Large DSPIAE airbrush holder holds the spray gun between individual steps without your having to lay it down on the working surface.
In stock
2.76 €
DSPIAEDS-CT-B60

CT-B60 Chamfering Tool Blades 60°

Blade bit with an angle of 60 degrees for the DSPIAE chamfering tool. It cuts instead of abrading and leaves a clean edge.
In stock
2.76 €
DSPIAEDS-CT-50

CT-50 Chamfering Tool Spherical Bit 5,0 mm

Spherical bit of 5.0 mm diameter for the DSPIAE chamfering tool. The largest of the diameters offered.
In stock
2.76 €
DSPIAEDS-CT-40

CT-40 Chamfering Tool Spherical Bit 4,0 mm

Spherical bit of 4.0 mm diameter for the DSPIAE chamfering tool. It has no use without the tool itself.
In stock
2.76 €
DSPIAEDS-CT-20

Chamfering Tool Spherical Bit 2,0 mm

A spherical bit 2.0 mm in diameter for the DSPIAE chamfering tool. It has no use without the tool itself.
In stock
2.76 €
DSPIAEDS-AT-TVAB

AT-TVAB Precision Stainless Steel Clamp Vise

A small stainless steel vise with smoothly guided jaws that are tightened with the fingers. It will hold a tiny molding, a photo-etched part or a piece of wire while you sand, drill or solder it.
In stock
70.36 €
DSPIAEDS54001

In stock
54.76 €
DSPIAEDS54071

In stock
6.36 €
DSPIAEDS54060

In stock
6.36 €
DSPIAEDS54061

In stock
7.16 €
DSPIAEDS56899

YPB-15 Tungsten Steel Broach 1,5 mm

YPB-15 Tungsten Steel Broach 1.5 mm is the widest tip in the whole series, intended for coarse shaping of grooves and of gaps between parts.
In stock
29.16 €
DSPIAEDS56898

YPB-10 Tungsten Steel Broach 1,0 mm

YPB-10 Tungsten Steel Broach 1.0 mm is a one-millimeter scribing tool for coarse division of a surface and for prominent grooves.
In stock
29.16 €
DSPIAEDS56897

YPB-08 Tungsten Steel Broach 0,8 mm

The DSPIAE YPB-08 tungsten steel scriber tip, 0.8 mm is a tool for scribing panel lines and grooves 0.8 mm wide.
In stock
29.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.