Ducati 1199 Panigale S Chain EXPERT

A replacement chain for a model of the Ducati 1199 Panigale S motorcycle, in the version marked EXPERT. A separate accessory in place of the part from the kit.

Manufacturer BANON DESIGN
Product EAN9791111870955

Responsibility details are not available.

12.76 €
10.55 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Chain for a model of the Ducati 1199 Panigale S

A replacement chain for a model of the Ducati 1199 Panigale S motorcycle, in the version marked EXPERT according to the name. It takes the place of the chain supplied in the kit. The manufacturer gives closer details of the version and of the contents of the package.

Why with this subject in particular

On this machine the rear wheel is carried by a single-sided swingarm, so the drive stays entirely exposed on one side: nothing covers the sprocket or either run of the chain, and the view of them goes right down to the individual links. The part from the kit tends to be made as a single piece with suggested relief, which has smooth sides and no openings between the links. A separate accessory, by contrast, is articulated along its whole length.

When and how to install the chain

Fit it only after the frame, the swingarm and the wheel have been sprayed, while you can still reach the place with tweezers. Try the route out dry first and check how the chain seats on the sprocket and on the front sprocket. Accessories of this kind are not usually joined with modeling glue for polystyrene; a minute drop of cyanoacrylate glue applied on the tip of a wire is more reliable. Wipe the surplus off immediately; once dry a flat stain is left that is removed only with difficulty.

The detail that decides

On the real machine the upper run goes straight and the lower one sags slightly. A perfectly taut line therefore looks unnatural and a slight sag does the model more good than an attempt at a straight line. The model, paints, glue and tools are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The chain itself, as a replacement for the part from the kit. The model, paints and glue are not included, unless stated otherwise.

According to the name it is intended for a model of the Ducati 1199 Panigale S. Check the particular kit and the scale in the manufacturer's information; the name does not give them.

It is a designation of a version which sets the item apart among the versions of the same chain. The manufacturer gives the scope of the version.

Only after the frame, the swingarm and the wheel have been sprayed. Try the route out dry and secure the joint with a minute drop of cyanoacrylate glue on the tip of a wire.

The upper run goes straight and the lower one sags slightly. A slight sag therefore looks more believable than a perfectly straight line.

Last seen

BANON DESIGNCHA003

Ducati 1199 Panigale S Chain EXPERT

A replacement chain for a model of the Ducati 1199 Panigale S motorcycle, in the version marked EXPERT. A separate accessory in place of the part from the kit.
In stock
12.76 €
BANON DESIGNBAN026

BAN026 bleed nipple screw w cap

An imitation bleed screw with a cap for motorcycle models. A small part that kits usually do not have on the brake caliper at all.
In stock
10.36 €
Fine ArtFA-587

Spatula #4 12,5 cm

The Fine Art spatula No. 4, 12.5 cm is a modeling tool — a metal blade for applying and smoothing putty.
In stock
3.16 €
RB modelRB100A011:100

1:100 Armored Observation Cupola 9x8mm (2)

An armored observation cupola measuring 9 by 8 millimeters for ship models in 1:100 scale. A small accessory for the superstructure of a warship.
In stock
3.16 €
TamiyaTA126511:12

1:12 Honda NSR500 `84 Front Fork Set

Tamiya 1:12 Honda NSR500 '84 - Front Fork Set is a detail accessory, not a model. The metal parts raise the realism of the front fork of the racing bike.
In stock
21.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.