1:35 Hetzer Mid and Late - Saukopf Mantlet Correction / Long Type (for Takom Kits / 3D-Printed)

1:35 Hetzer Mid and Late - Saukopf Mantlet Correction / Long Type (for Takom Kits / 3D-Printed)

7.56 €
Add to Cart

1:35 Hetzer Mid and Late - Saukopf Mantlet Correction / Long Type (for Takom Kits / 3D-Printed)

1:35 Hetzer Mid and Late: Saukopf Mantlet Correction, the long type is a correction part from the brand CMK printed by 3D technology, which replaces the cast gun mantlet on a model of the tank destroyer Hetzer of the middle and late production batches.

Scale1:35
Manufacturer CMK
Product EAN9991117362377

Responsibility details are not available.

7.56 €
6.25 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Saukopf gun mantlet correction for the Hetzer in 1:35 scale

This item is not a vehicle kit but a detail correction part from the brand CMK, printed by 3D technology. It replaces the gun mantlet of the so-called Saukopf type in the long form that the machines of the middle and late production batches carried. The part is intended to be swapped for the piece from the box and solves a shape that is the first thing seen on a model.

The real subject

The light tank destroyer Jagdpanzer 38, nicknamed the Hetzer, was based on the chassis of the Czechoslovak tank Pz.Kpfw. 38(t) and was built from 1944 in Czechoslovakia. It was a low, fully armored vehicle with the gun in the front plate of the hull. Instead of a rotating turret it carried the gun covered by a cast mantlet, whose rounded shape gave rise to the nickname pig's head, in German Saukopf. The mantlet changed during production and existed in a shorter and a longer form; the longer form corresponds to the later machines.

Fitting and painting tips

First wash the printed parts in lukewarm soapy water, so that the remains of uncured resin are removed. Cut the printing supports off with a sharp scalpel or a fine saw and sand the marks they leave away wet. Cut the original plastic part off the model carefully and level the surface, try the new mantlet dry and glue with cyanoacrylate glue. Before painting, apply a primer filler that unifies the surface of the resin and the plastic. The cast surface of the mantlet comes out well with a dark wash and with a dry brush, which draws out the structure of the casting.

Who the part is for

  • Modelers building the Hetzer of the middle and late batches in 1:35 scale
  • Anyone interested in a shape-accurate rendering of the gun mantlet
  • More experienced builders who dare to swap out a part from the box
  • Competition modelers and builders of dioramas

The accessory is supplied unpainted. The vehicle model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is the period nickname for the cast gun mantlet with a rounded shape resembling a pig's head. On the Hetzer it covered the mounting of the gun in the front plate of the hull.

It is not. It is a single correction part that replaces a piece of a kit. The Hetzer model has to be bought separately.

Wash it in lukewarm soapy water, cut the supports off with a sharp scalpel or a fine saw, sand the marks away wet and apply a primer filler before painting.

According to its name it corresponds to the machines of the middle and late production batches, which carried the longer form of the mantlet. On early vehicles it is worth comparing the shape against documentation beforehand.

Last seen

CMKP350451:35

1:35 Hetzer Mid and Late - Saukopf Mantlet Correction / Long Type (for Takom Kits / 3D-Printed)

1:35 Hetzer Mid and Late: Saukopf Mantlet Correction, the long type is a correction part from the brand CMK printed by 3D technology, which replaces the cast gun mantlet on a model of the tank destroyer Hetzer of the middle and late production batches.
In stock
7.56 €
ELEFANTEL351041:35

1:35 Tow cables eyes for M60 family, 20 pcs.

Tow cable eyes for the M60 family is a resin add-on set in 1:35 scale from the ELEFANT brand, 20 pieces.
In stock
5.56 €
AberABR35L3261:335

1:335 Germ.75mm barrel for Pz VI F2 or G without muzzle brake

A turned replacement barrel of the German 75 mm gun in 1:35 scale, in the configuration without a muzzle brake. Intended for a model of the Pz.Kpfw. IV Ausf. F2 or G.
In stock
7.16 €
1:35 9M38 Surface-to-air Missile Display Racks & Missile Container-25 %Stock ClearanceFavorite
MengSPS-0631:35

1:35 9M38 Surface-to-air Missile Display Racks & Missile Container

9M38 Surface-to-air Missile Display Racks and Missile Container is a resin add-on set from Meng in 1:35 scale with racks for surface-to-air missiles and a transport container. It is not a model of a vehicle.
5 leftof 6
49.56 €37.16 € You save 12.40 €
BroncoAB35561:35

1:35 Canvas Cover for Limber NO.27

Bronco 1:35 Canvas Cover for Limber No.27 is a detailing accessory that represents a canvas cover thrown over the No.27 ammunition limber.
In stock
3.96 €
GunzeHUG305

Mighty Strike Freedom Dark Blue Semi-Gloss

A dark blue semi-gloss tone intended for the armor of the upgraded main machine from a Gundam film series.
In stock
5.16 €
MengSPS-0281:35

1:35 RUSSIAN V-84 TANK ENGINE

A detail accessory set - a plastic model of the Russian tank engine V-84 in 1:35 scale from the manufacturer Meng.
In stock
20.76 €
ELEFANTEL351061:35

1:35 Tow cables eyes for Leopard 2, variant 1, 20 pcs.

Tow cable eyes for the Leopard 2 (variant 1) is a resin accessory set in 1:35 scale from ELEFANT, 20 pieces.
In stock
5.56 €
AberABRR06

Narrow weld lines

Aber Narrow weld lines is a photo-etched set of narrow weld beads - a blank with which welded joints of armor plates and sheet metal are imitated on a model.
In stock
4.20 €
Heavy HobbyHH350141:35

1:35 Fire Extinguisher Late Type For WWII Germany Panzer

A late type fire extinguisher for German WWII tanks in 1:35 scale is a 3D printed resin accessory which replaces a simplified part with a precise replica of the period fire extinguisher.
In stock
11.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.