1:48 McDonnell F-4B Phantom II Pre-cut painting masks

1:48 McDonnell F-4B Phantom II Pre-cut painting masks

6.28 €
Add to Cart

1:48 McDonnell F-4B Phantom II Pre-cut painting masks

1:48 McDonnell F-4B Phantom II - Reskit pre-cut masks are a self-adhesive masking set for painting the frames of the glazing and other small areas precisely. It is not a kit but an accessory for building the model.

Scale1:48
Manufacturer Reskit
Product EAN8591111000000

Responsibility details are not available.

8.36 € 6.28 €
5.19 € without VAT
−25 % You save 2.08 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Reskit pre-cut masks in 1:48 scale for the McDonnell F-4B Phantom II

This item is not a model of the aircraft but a masking set from the Ukrainian brand Reskit. The masks are machine cut to the shape of the individual frames and areas, so laborious and imprecise cutting of strips of adhesive tape with a scalpel is done away with. The modeler lifts the individual pieces out of the sheet, sticks them onto the model and sprays the area; once the paint has dried the masks are peeled off and a clean edge is left under them. The set is cut for one particular kit in 1:48 scale, so check before buying that it matches the kit you are building.

The real subject

The McDonnell F-4B Phantom II is a carrier-based two-seat twin-engine fighter aircraft of the US Navy and the US Marine Corps. It was one of the first production versions of the Phantom, powered by a pair of J79 jet engines. The machine had a characteristic silhouette with the raised outer panels of the wing and the drooping horizontal tail. The canopy glazing on a Phantom is intricate and is made up of several separate parts with pronounced frames, so masking is among the most laborious parts of the build.

Usage tips

Degrease the surface before sticking the masks on and let the paint of the surface dry completely. Lift the masks out of the sheet with tweezers and press them down with the tip of a toothpick or a wooden stick, especially in the corners and on the curves. It is advisable to spray the glazing first with the interior color and then with the base color of the fuselage, so that the frames look right from inside as well. Spray in several thin coats, as a heavy coat of paint can run under the edge of a mask. Peel the masks off while the paint is freshly dry but not yet fully cured, at an angle and slowly.

Who the set is for

  • Modelers who want sharp cockpit frames without cutting tape by hand
  • Builders of the Phantom in 1:48 scale who spray with an airbrush
  • Those who want to save time on intricate glazing
  • Beginners who are not yet managing to mask the frames

The package contains masking material only. The model, paints and glue are not included.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a masking set, that is an accessory for painting a model. The kit itself has to be bought separately.

Pre-cut masks are cut for one particular kit in a given scale. Check the match with the model you are building before buying, therefore.

With an accessory of this type the basis is usually the canopy glazing. The extent of the set is stated on the box.

Peel them shortly after the paint has dried, at an angle and slowly. Tweezers with pointed jaws will help.

Last seen

1:48 McDonnell F-4B Phantom II Pre-cut painting masks-25 %Stock ClearanceFavorite
ReskitRSM48-00191:48

1:48 McDonnell F-4B Phantom II Pre-cut painting masks

1:48 McDonnell F-4B Phantom II - Reskit pre-cut masks are a self-adhesive masking set for painting the frames of the glazing and other small areas precisely. It is not a kit but an accessory for building the model.
Last one!
8.36 €6.28 € You save 2.08 €
Royal ModelRM8291:35

1:35 German tank crew in winter dress - WWII

In stock
39.16 €
Border ModelBS-0041:350

1:350 Yamato - Imperial Japanese Navy Battleship

The Yamato in 1:350 scale is a plastic kit of the Japanese battleship from the maker Border Model.
In stock
199.96 €
PANZER ARTFI35-0251:35

1:35 British RAC officer North Africa No.2

British RAC officer in North Africa no. 2 is a resin figure in 1:35 scale from PANZER ART, depicting an officer of the British Royal Armoured Corps in the desert.
In stock
13.96 €
Red Fox StudioRFSQS-480651:48

1:48 Messerschmitt Me 262A-1/A-2 with R4M & Bomb Selector (for Tamiya kit)

Messerschmitt Me 262A-1/A-2 with R4M 3D instrument panel 1:48 (Red Fox Studio) is a pre-painted acrylic instrument panel and cockpit detail for a model of this German jet aircraft. It is neither a kit nor a wet decal. Intended for the Tamiya kit.
In stock
12.76 €
ReskitRSU72-01461:72

1:72 B-58 Hustler exhaust nozzles for Italeri kit

A resin and 3D-printed detail set, the B-58 Hustler exhaust nozzles (for Italeri) in 1:72 scale from Reskit. It is not an aircraft model but a set of replacement engine nozzles.
In stock
25.96 €
XtradecalX721181:72

1:72 Battle of Britain 70th Anniversary 2010 Luftwaffe

Xtradecal 1:72 Battle of Britain 70th Anniversary 2010 Luftwaffe is a waterslide decal sheet with markings of German aircraft from the period of the Battle of Britain.
In stock
15.96 €
TamiyaTA312151:700

1:700 Japanese Aircraft Carrier Shinano

A plastic kit of the Japanese aircraft carrier Shinano in 1:700 scale from Tamiya (Waterline Series) — the largest aircraft carrier of the Second World War.
In stock
29.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.