Reskit 1:48 Pivot pylons for the F-111 (A, D, E) with LAU-105 (4 pcs) is a set of 3D-printed resin pylons with twin missile rails.
Responsibility details are not available.
The set brings four 3D-printed resin pivot pylons together with LAU-105 rails in 1:48 scale. It is an aftermarket accessory for a plastic kit that replaces the parts from the box with truer detail of the external stores.
On a tactical bomber with a variable-geometry wing the pylons pivoted so that the weapons stayed aligned with the direction of flight regardless of the wing sweep angle. The LAU-105 is a twin launch rail meant above all for short-range guided missiles. The A, D and E versions represent early and export modifications of this machine.
Wash any uncured resin off the parts, cut the 3D print supports away and even the surfaces out by sanding with respiratory protection. Make the joints with super glue. Lay down a primer before spraying, paint with an airbrush and bring out the fine edges with a wash or a dry brush.
The set is supplied unassembled and unpainted. Glue, paints and the base kit are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
