1:48 Seat for Bf 109G with belts (Eduard)

3DF 1:48 seat for the Bf 109G with belts (for Eduard)

A 3D printed cockpit accessory from the manufacturer 3DF. It contains a pilot's seat with seat belts for the Messerschmitt Bf 109G in 1:48 scale and is shaped for the kit from Eduard. It is not an aircraft kit — the model itself has to be bought separately. Unlike the sets for the Me 262, there are no foot pedals here; this is a seat with belts for a different type of aircraft.

Why it makes sense

The Bf 109G, nicknamed Gustav, was the most widespread version of this German fighter and is still among the most frequently built models of all. Its cockpit is clearly visible and the seat with belts is its most conspicuous detail. The belts are printed as part of the piece and have a realistic sag, so you do not have to bend photo-etched strips or improvise with foil — the natural shape comes straight out of the box.

Use and fitting

• Wash the parts free of print resin residue and let them dry thoroughly.
• Cut the print supports off with a sharp scalpel or a fine saw and sand the remains smooth.
• Sand with respiratory protection (a respirator), preferably wet — dust from print resins should not be inhaled.
• Glue with cyanoacrylate glue (super glue); cement for plastic will not bond print resin.
• Apply a primer before painting, paint the belts in a different color and pick them out with a wash so that their sag stands out.

Who the set is for

For modelers who are building the Eduard Bf 109G in 1:48 scale and want a quick, convincing improvement of the cockpit without working with photo-etched parts. Fitting is simple: a sharp tool and a little patience are enough.

Note: this is a different aircraft and a different kit from the seats for the Me 262 — the individual variants differ in the target kit and the scale, so do not buy blind. Paints, glue and the model are not included in the package.