1:48 Su-31 Around the World Pt.1 (Quinta Models) (With 3D-Printed and Fiberglass resin parts)

1:48 Su-31 Around the World Pt.1 (Quinta Models) (With 3D-Printed and Fiberglass resin parts)

23.56 €
Add to Cart

1:48 Su-31 Around the World Pt.1 (Quinta Models) (With 3D-Printed and Fiberglass resin parts)

A Quinta Models decal sheet for the Su-31 aerobatic aircraft in 1:48 scale, supplemented with printed parts and parts of fiberglass resin.

Scale1:48
Manufacturer Quinta Studio
Product EAN9991117369123

Responsibility details are not available.

23.56 €
19.47 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Su-31 is a single-seat aerobatic aircraft built for the highest aerobatic class. It is powered by a piston radial engine, and the landing gear is fixed, not retractable, with a tailwheel at the back. The structure relies on light weight and on resistance to high g loads, so that the machine will stand up to routines flown at the limit of the pilot's ability. The Pt.1 designation in the name marks the first part, which the further parts of the series follow.

What the set contains

Its core is a printed decal sheet. To it the manufacturer adds printed parts and parts of fiberglass resin, which supplement the flat decoration with real volume. The extent and layout of the sheet follow the manufacturer's material, so go through the enclosed diagram before you start work and plan the order of application.

Applying and preparing the parts

The decals are wet. Cut the element out, dip it in lukewarm water for a few seconds and let it rest on absorbent paper until it starts to release from the backing. Apply it over smooth gloss varnish and draw the surplus water off. Do not use a decal softener, as it attacks the printed resin. The printed parts carry the remains of print supports; cut them off with a sharp blade a little way from the part and sand the surface down. Rid the fiberglass resin parts of surplus material in the same way. Wash and degrease both before painting; they are glued with cyanoacrylate glue.

Terms of supply

A decal sheet with add-on parts is what is supplied. The aircraft kit, paints and glue are not part of it, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

They are wet. Dip the element in lukewarm water for a few seconds, let it rest on absorbent paper and transfer it onto smooth gloss varnish. Do not use a decal softener, as it attacks the printed resin.

Printed parts and parts of fiberglass resin, which supplement the flat sheet with elements of real volume. They are prepared by cutting the surplus material off and sanding it down.

It marks the first part, which the further parts of the series follow. The contents of the individual parts do not overlap.

It is not. A decal sheet with add-on parts is what is supplied; the model itself you obtain separately.

Last seen

Quinta StudioQL+480131:48

1:48 Su-31 Around the World Pt.1 (Quinta Models) (With 3D-Printed and Fiberglass resin parts)

A Quinta Models decal sheet for the Su-31 aerobatic aircraft in 1:48 scale, supplemented with printed parts and parts of fiberglass resin.
In stock
23.56 €
Quinta StudioQD+240381:24

1:24 Nissan Silvia S13 LHD version 3D-Printed & coloured Interior on decal paper (Tamiya) (with metal sticker parts)

The interior of the Nissan Silvia S13 coupe in the left-hand-drive version, printed in color on a decal backing paper in 1:24 scale. It matches the Tamiya moldings and also carries metal parts with their own adhesive.
In stock
17.56 €
Quinta StudioQD+240261:24

1:24 Ford GT40 Mark II (1966) - 3D-Printed & Coloured Interior with 3D-Printed Resin Parts and Metal Stickers (for Meng Kits)

A combined interior set for the 1966 Ford GT40 Mark II in 1:24 scale. It contains color 3D decals, 3D-printed resin parts and metal foil labels, and it is made for the Meng kits.
In stock
38.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.