1:48 WWII German SturmTiger Upgrade Set (Tamiya 32591)

1:48 WWII German SturmTiger Upgrade Set (Tamiya 32591)

18.76 €
Add to Cart

1:48 WWII German SturmTiger Upgrade Set (Tamiya 32591)

A photo-etched set for a model of the Sturmtiger in 1:48 scale from Voyager Model adds the thin metal details that cannot be molded in plastic to a kit - grilles, brackets and fine stiffeners.

Scale1:48
Manufacturer Voyager Model
Product EAN9991117368255

Responsibility details are not available.

18.76 €
15.50 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Sturmtiger 1:48 - a Voyager Model photo-etched upgrade set

This item is not a kit of the vehicle, but a supplementary photo-etched set. It is intended to raise the detail of a plastic model of the German Sturmtiger heavy assault vehicle in 1:48 scale. The photo-etched parts replace plastic components that are necessarily too thick in a small scale, and they add features that a mold cannot capture. The maker is Voyager Model, a brand that specializes in precisely these photo-etched and metal accessories for military vehicles.

The real subject

The Sturmtiger, in full the Sturmmörser Tiger, was a German self-propelled vehicle of the Second World War built on the chassis of the Tiger I heavy tank. Instead of a turret it carried a large-caliber rocket launcher in the front wall of a casemate, intended to destroy fortified objects in built-up areas. The vehicle came about by converting Tiger hulls and was built in small numbers only. Its characteristic features are the tall casemate with its thick frontal armor, a small crane at the rear and a loading hatch for the heavy ammunition.

Building tips

Separate the parts with a sharp scalpel on a hard surface, not with pliers, as the edges would deform. Make the bends in an etch bender or over a metal ruler. Glue the etch with superglue; on larger surfaces a slower gel version is better, as it allows a part to be adjusted. Degrease the metal before painting and prime it, or the paint will peel. On a vehicle of this type it pays to assemble and paint the running gear before the hull is closed up, and to add dust pigments and mud effects at the end.

Who the set is for

  • More experienced modelers with experience of photo-etched parts
  • Builders of military vehicles in 1:48 scale
  • Those who want a model with finer detail than injection-molded plastic allows
  • Modelers preparing a vehicle for a diorama viewed from close up

This is an accessory, not a kit. The basic model, the paints and the glue are not included in the package, unless stated otherwise. Check the match with your kit before buying.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. These are photo-etched parts for raising the detail only; the plastic kit has to be bought separately.

Working with etch calls for a scalpel, an etch bender or a ruler and superglue. For a complete beginner it is more demanding, but manageable with a careful approach.

Photo-etched sets are drawn to a particular plastic model. Before buying, therefore, check that it matches the kit you have.

Superglue, or epoxy. Cement for plastic does not hold on metal.

Last seen

Voyager ModelVPE480421:48

1:48 WWII German SturmTiger Upgrade Set (Tamiya 32591)

A photo-etched set for a model of the Sturmtiger in 1:48 scale from Voyager Model adds the thin metal details that cannot be molded in plastic to a kit - grilles, brackets and fine stiffeners.
In stock
18.76 €
Red Fox StudioRFSQS-320691:32

1:32 F-16C Block 40/42 (for Tamiya kit)

A 1:32 F-16C Block 40/42 3D instrument panel from Red Fox Studio is a prepainted color accessory which takes the place of the flat instrument panel of a modern cabin with realistic three-dimensional detail.
In stock
21.56 €
Red Fox StudioRFSQS-320631:32

1:32 F-16C Block 30/32 (for Tamiya kit)

A color set of the instrument panel, the side panels and the lettering for the Fighting Falcon of the Block 30/32 version in 1:32 scale. Prepared for the kit from Tamiya.
In stock
29.56 €
BroncoAB35191:35

1:35 Chinese PLA 200L Oil Drum Set

Chinese PLA 200L Oil Drum Set is a plastic set of accessory drums in 1:35 scale from Bronco.
In stock
3.96 €
Red Fox StudioRFSQS-320681:32

1:32 A-4M Skyhawk (for Trumpeter kit)

Red Fox Studio 3D instrument panel A-4M Skyhawk 1:32 is a color relief 3D replacement for the instrument panel to dress up the cockpit. It is not a kit — it is intended for the A-4M model in 1:32 scale (for Trumpeter).
In stock
17.16 €
Red Fox StudioRFSQS-320621:32

1:32 F-16A MLU (for Tamiya kit)

1:32 F-16A MLU 3D instrument panel from Red Fox Studio is a pre-painted color accessory that replaces the flat instrument panel of this modern cockpit in the Tamiya kit with realistic three-dimensional detail.
In stock
29.56 €
1:35 Dodge WC-54 Ambulance
-14 %
Favorite
ZvezdaZV37111:35

1:35 Dodge WC-54 Ambulance

Dodge WC-54 Ambulance is an injection-molded plastic model of the American ambulance of the Second World War in 1:35 scale from the manufacturer Zvezda. The model is supplied unassembled and unpainted.
In stock
41.16 €35.56 € You save 5.60 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.