1:32 AERIAL BOMB FAB-1500

FAB-1500 aerial bomb 1:32 from Temp Models

The set contains a 3D printed resin replica of the heavy FAB-1500 aerial bomb in 1:32 scale. This is an accessory for the underwing armament, not a model of an aircraft. The print holds the smooth body as well as the thin tail surfaces and the suspension lugs, which an injection mold thickens. In 1:32 scale it is a striking piece.

The real subject

The FAB-1500 is a Soviet and Russian high-explosive fragmentation aerial bomb of the fifteen hundred kilogram weight class, that is one of the heaviest weapons tactical aircraft carry. Because of its weight it is slung on fuselage or strengthened wing pylons and an aircraft takes only a few of them. It is used against fortified targets, bridges and large structures. In recent years it has also served as the basis for glide munitions with an add-on module.

Building and painting tips

First wash the 3D printed parts in warm water with a little dish soap, so that they are rid of the residue of printing resin. Cut the supports off with a sharp blade or a fine saw as close to the part as possible and sand the marks down with your airways protected. Resin does not bond with cement for polystyrene, so use cyanoacrylate glue. Lay a thin coat of primer on before painting, otherwise the paint holds poorly on a smooth print. Assemble and paint the weapons separately and glue them onto the pylon only once the varnish has dried, so that the fine surfaces are not rubbed.

Who the set is for

• A replica of the heavy FAB-1500 bomb in 1:32 scale
• A resin 3D print with fine resolution
• An accessory set, not a model of an aircraft
• The 1500 kg weight class, a striking piece even on a model
• Calls for cyanoacrylate glue and a primer under the paint

The set is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.