CL107 Flaxen Base Color Gloss

A gloss Gunze Mr.Color base shade from the CL range, the manufacturer's part number CL107. Flaxen is a light warm fair tone, that is the tone of flax, straw and fair hair.

Manufacturer Gunze
Product EAN9991117366086

Responsibility details are not available.

3.40 €
2.81 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The color

Flaxen is a light warm tone between cream and fair, named after flax. It is neither a pure yellow nor a beige: it has a yellowish core but is softened, so on a model it comes across gently and does not shout. Its name lists it as a base shade with a gloss surface, that is as a paint applied as the first covered layer, on which further tones only then rest. The paint belongs to the CL range of the brand Gunze Mr.Color and is listed under the designation CL107.

Where it is useful

On the fair hair of figures, on light wood, straw and canvas, on the light leather of harnesses and bags, and also as a base layer under the shading and glazes with which the final shade is only then built up. A gloss surface is an advantage for that work in two respects: a glaze slides over it and can be feathered into a soft transition, and a decal will not form a silvery edge on it. The final degree of sheen is then set by clear coating.

How to apply the paint

  • Stir the bottle thoroughly before use, as the pigment settles at the bottom.
  • Thin it with the thinner of the same range and apply thin coats, as light warm tones are easily flooded.
  • On a dark base reckon with more coats or with a light base color.
  • The instructions on the packaging give the procedure for particular use within the manufacturer's system.
  • Let the paint dry through before masking, as a fresh film peels off with the tape.

What is in the box

One bottle of paint. The thinner, a brush, varnishes and a model are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A light warm tone between cream and fair, named after flax. It is not a saturated yellow but rather a softened yellowish shade.

That the shade is intended as the lower covered layer, over which further tones only then come. It can also be used on its own.

A gloss base keeps a glaze moving and does not create a silvery edge around decals. A matte surface is achieved by clear coating.

The thinner of the same Mr.Color range. The manufacturer gives the thinning ratio for a gun as well as for a brush on the packaging.

Last seen

GunzeCL107

CL107 Flaxen Base Color Gloss

A gloss Gunze Mr.Color base shade from the CL range, the manufacturer's part number CL107. Flaxen is a light warm fair tone, that is the tone of flax, straw and fair hair.
In stock
3.40 €
GunzeC080

Mr. Color - kobaltová modrá

A cobalt blue shade from the basic Mr. Color line in a 10 ml bottle. A solvent-based paint intended for an airbrush.
In stock
3.20 €
YÜRGEN, BAD PIPE – 35MM-25 %Stock ClearanceFavorite
AK interactiveRAGE021

YÜRGEN, BAD PIPE – 35MM

Last one!
13.96 €10.48 € You save 3.48 €
EduardED6320311:32

1:32 Me 262 kola

Me 262 resin wheels (1:32) is a set of cast resin replacement wheels in 1:32 scale from the Czech manufacturer Eduard (the Brassin line). It is not a model, but an accessory that replaces the wheels from a plastic kit of the Messerschmitt Me 262 jet fighter.
In stock
10.40 €
EduardED990021:350

1:350 Japonské lodě – zábradlí

Eduard 1:350 Japanese ships: railings is a set of universal photo-etched railings for models of Japanese warships. An aftermarket accessory, not a ship model.
In stock
10.40 €
MontexMXK322971:32

1:32 MOSQUITO IV

Cuts for the de Havilland Mosquito B Mk.IV. The glazed nose gets one film for the outer face, the large roundels four stencils, and the fine markings remain the job of decals.
In stock
11 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.