Landing gear legs for the MiG-35 in 1:48 scale are a 3D-printed resin accessory from Temp Models, reinforced with steel pins.
Responsibility details are not available.
A resin set of landing gear legs for a MiG-35 model in 1:48 scale from the Russian brand Temp Models. For the sets in this series the manufacturer states printing from a strong polymer reinforced with steel pins, and the extended position with the lines, the landing lights and a fender picked out. It is not an aircraft kit but replacement parts for your own model.
The MiG-35 is the latest step in the development of the line that began with the MiG-29. Against the original machine it has a modified airframe, different equipment and a higher takeoff weight, so the landing gear too was given a more durable design. The nose leg with two wheels sits well back under the air intakes, the main legs retract into the fuselage. On a model the whole assembly is clearly visible, because the machine is usually built with the gear extended.
Release the parts from the supports with a scalpel and level the mating faces. Wash the resin in lukewarm soapy water before painting. Spray the legs before fitting and bring the lines out with a dark tone run into the recesses. A faint oil weep suits the area around the shock struts, and runway dust the lower parts.
The set is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
