29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:72 MIG-29 SMT LANDING GEARS

These landing gear legs for the MiG-29 SMT in 1:72 hold, according to the manufacturer, the nose as well as the main legs with imitated electrical and hydraulic systems, a mudguard and wheels, reinforced with steel rods. An accessory for a kit.

Scale1:72
Manufacturer Temp Models

Responsibility details are not available.

Price to be confirmed
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

MiG-29 SMT landing gear legs in 1:72 from Temp Models

A detailed replacement landing gear in 1:72 scale from the Russian manufacturer Temp Models. For the set the manufacturer gives finely detailed nose and main legs in the ground position with imitated electrical and hydraulic systems and landing lights, as well as a mudguard and wheels. According to the manufacturer the legs are made by 3D prototyping from a high-strength polymer and reinforced with steel rods.

The real subject

The MiG-29 SMT is the upgraded form of the tactical fighter with an enlarged fuselage spine, which took another fuel tank and newer avionics. The higher takeoff weight makes greater demands on the landing gear than on the original versions, so the sturdiness of the legs and the strength of replacement parts matter even more on this form. The nose leg carries a prominent mudguard protecting the engines from debris off the runway.

Building and painting tips

Landing gear legs are among the most heavily loaded parts of a model. The steel reinforcement inside the parts raises their load capacity markedly, yet let the joints cure thoroughly before you stand the model on its wheels. Cut the print supports away with a scalpel and sand the pad, and glue the parts with cyanoacrylate glue, that is with super glue. Landing gear legs used to be light gray and got dirty quickly, so a dark wash and fine traces of dust show up well on them. Sanding is best done wet and with respiratory protection.

Who the set is for

  • modelers building the MiG-29 SMT in 1:72 scale
  • builds where the landing gear should be sturdy and detailed
  • dioramas in which the landing gear is clearly visible
  • more experienced modelers used to printed parts

The set is supplied unassembled and unpainted. Glue, paints and the base model are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The manufacturer states that the legs are reinforced with steel rods, which raises their load capacity markedly over plastic parts.

According to the manufacturer, the nose and main legs in the ground position with imitated electrical and hydraulic systems, landing lights, a mudguard and wheels.

No. It is a replacement landing gear for a finished MiG-29 SMT kit.

Last seen

HaulerHLX483821:48

1:48 Sd.Kfz.184 Elefant FENDERS (Tamiya)

Photo-etched fenders for the Sd.Kfz.184 Elefant in 1:48 scale are a partial accessory for a kit, not a model. They replace thick plastic fenders with thin metal, which can moreover be bowed or damaged. The target kit is from Tamiya.
In stock
11.96 €
AoshimaAO059111:24

1:24 Cyber Formula 11 Super Asurada AKF-11

A plastic kit of the Super Asurada AKF-11 racing special from the Cyber Formula 11 range in 1:24 scale from the Japanese manufacturer Aoshima.
In stock
31.96 €
AiresAIR42641:48

1:48 Su-27 Flanker B exhaust nozzles

The resin detail set Aires Su-27 Flanker B exhaust nozzles in 1:48 scale. Resin exhaust nozzles for a plastic kit, not a stand-alone model.
In stock
20.80 €
Syhart DecalSY48-1481:48

1:48 Rafale C 4-IR 'Rafale Solo Display 2023'

Rafale C 4-IR, Rafale Solo Display 2023 (1:48) is a sheet of wet decals from Syhart Decal for the striking solo display scheme of the French Rafale of the 2023 season.
In stock
15.16 €
Eureka XXLE-0511:35

1:35 Modern US Army Water Canisters Set #2

Eureka XXL 1:35 modern US Army water canisters, set 2 is an add-on set of miniatures of today's military water containers, intended for fitting out vehicle models and modern dioramas.
In stock
8.36 €
HasegawaHA075261:48

1:48 F-86F-40 SABRE™ “BLUE IMPULSE FIRST SCHEME WINGMAN”

An injection-molded plastic kit of the F-86F-40 Sabre Blue Impulse fighter in 1:48 scale from Hasegawa. The model captures a machine of the Japanese Blue Impulse display team in its historic first color scheme.
In stock
39.96 €
AiresAIR44691:48

1:48 Harrier GR Mk.5/7 exhaust nozzles

A resin set of the Harrier GR Mk.5/7 exhaust nozzles in 1:48 scale from Aires . It is not an airplane model but a detail accessory that replaces the vectoring nozzles in a kit with more accurate castings.
In stock
12.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.