Gunze MT-303 Waterproof Sand Paper, 180 grit is a coarse waterproof abrasive paper (4 sheets) for fast material removal and rough shaping. It sands wet as well as dry.
Responsibility details are not available.
Waterproof abrasive paper from Gunze (Mr.Hobby) in the coarse 180 grit. The package contains 4 sheets. The word waterproof is the key one: the paper is intended above all for wet sanding, where both the surface and the paper are wetted with water. Wet sanding has three big advantages: it makes no dust (and sanded plastic or resin dust is harmful to health and should not be inhaled), the paper does not clog, because the water keeps washing the removed material away, and the surface therefore comes out smoother and more even. The paper also copes with dry sanding.
The lower the number, the coarser the paper. 180 grit is the coarsest step and serves for fast material removal: knocking down large flash, sanding off casting blocks, rough shaping and leveling pronounced irregularities. It does, however, leave deep scratches, so it must always be followed by a finer grit.
For modelers who need to take coarse material off quickly before further cleanup. Anyone who skips the finer steps risks the deep scratches left by the coarse paper showing through under the clear coat, where the gloss will emphasize them. That is why abrasive papers are bought in a whole range of grits.
Dry sanding creates dust: use a respirator and ventilate. Wet sanding cuts the dust down markedly.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!