Gunze MT-308 Waterproof Sand Paper, 1500 grit is a very fine waterproof abrasive paper (4 sheets) for sanding between coats of clear and preparing a surface under the final gloss. It can be used wet or dry.
Responsibility details are not available.
A waterproof abrasive paper from Gunze (Mr.Hobby) in a very fine 1500 grit. The package contains 4 sheets. It is meant mainly for wet sanding: you keep wetting both the surface and the paper with water. Wet sanding makes no dust (the clear coat and plastic dust that is sanded off is harmful and must not be inhaled), the paper does not clog, because the water washes the removed material away, and the surface stays as smooth as possible, which is the key point with a grit this fine. The paper can also be used dry.
The higher the number, the finer the paper. 1500 is a very fine step that is already used on the clear coat, not on bare plastic: for sanding between coats of clear, for evening out the small grains of dust caught in the dried clear coat and for preparing the surface under the final gloss (polishing). It removes only a trace of material: it merely refines and evens out.
For modelers who are fine-tuning a varnished surface and aiming at a high gloss. It is one of the last steps of step-by-step sanding from a coarse to a fine grit, and no earlier step should be skipped, or deeper scratches will show through under the gloss.
Dry sanding creates dust: use a respirator and ventilate. Wet sanding cuts the dust down markedly.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!