Landing gear legs for the Su-27 in 1:48 scale are a 3D-printed resin accessory from Temp Models, reinforced with steel pins.
Responsibility details are not available.
A resin set of landing gear legs for a model of the Su-27 fighter in 1:48 scale from the Russian brand Temp Models. For the sets in this series the manufacturer states printing from a strong polymer reinforced with steel pins, and the extended position with the lines, the landing lights and a fender picked out. A model of a large fighter is heavy and plastic legs sag under it in time; here that problem falls away. It is not an aircraft kit.
The Su-27 is a heavy twin-engine fighter whose main landing gear legs retract forward into the fuselage and whose nose leg retracts under the cockpit. The legs carry a machine with a takeoff weight of over twenty tons, so they are rugged and full of hydraulics, lines and struts. On a parked aircraft it is one of the most clearly visible assemblies and a viewer looks it over from every side.
Release the parts from the supports with a scalpel and level the mating faces. Wash the resin in lukewarm soapy water before painting. Spray the legs before fitting and bring the lines out with a dark tone run into the recesses. A faint oil weep around the shock strut and dust on the lower parts will lend a leg credibility.
The set is supplied unassembled and unpainted. The model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
