U.N.T. MS GREY 10ml

The color

A gray shade under the designation U.N.T. MS Grey. It belongs to the Gunze Mr.Color range of paints put together for kits from the Gundam setting, where the individual shades match the coloring of the machines from that subject. The advantage of a ready shade is that it can be reordered at any time and used again in the same form, whereas a mix you have put together yourself is hard to hit again after a while. The volume of the package is 10 ml.

How to use the paint

Shake the bottle thoroughly before use, so that the pigment settled at the bottom is mixed back in. The thinner and the thinning ratio differ between individual lines, so use the thinner intended for this line and follow the manufacturer's instructions on the packaging; a thinner from another line may curdle the paint. Test the consistency on a piece of scrap plastic, not straight on a part. The paint holds better on a surface that has been washed and degreased. Apply several thin coats instead of one heavy one, otherwise the fine engraving will be flooded and the edges of the parts will round off. When spraying, make sure the work area is ventilated and close the bottle carefully after use, so that the paint does not thicken.

Who it is for

The shade will be appreciated by builders of kits from the Gundam setting who want to paint according to the subject and do not want to search for the shade by mixing. It can also be used outside that area wherever a neutral gray tone suits.

• a gray shade under the designation U.N.T. MS Grey
• the Gunze Mr.Color line for kits from the Gundam setting
• package volume 10 ml
• the thinner intended for this line according to the manufacturer's instructions
• shake before use, apply in thin coats

Thinner, brushes, an airbrush and kits are not part of the delivery, unless stated otherwise.