AK Interactive Flash, an accelerator for cyanoacrylate glue, is an accelerator that cuts the curing of cyanoacrylate glue down to seconds.
Responsibility details are not available.
Flash from AK Interactive is an accelerator for the curing of cyanoacrylate (CA) super glue. It is not a glue in itself but an addition that activates it: once applied, it cuts the time to a solid joint down to mere seconds. It comes in a 150 ml spray and suits above all the gluing of parts with a small contact area.
Apply the cyanoacrylate glue to one surface and the accelerator to the other (or spray the joint lightly), then offer the parts up and hold them. Use it sparingly, as an excess can dull the surface. Work in a well-ventilated area and protect your eyes and skin.
For modelers who work with resin, metal and photo-etched parts and need joints made with cyanoacrylate glue fixed quickly and dependably.
The product is volatile: use it with good ventilation, away from flame, and protect your eyes and skin. Follow the manufacturer's directions on the packaging.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
