Sanding plates of 600 and 1000 grit form a pair of plates for the gradual smoothing of the surface of a model.
Responsibility details are not available.
According to the name the package contains two plates and with them two tens of sanding sheets in two steps of fineness. The numerical values from the name refer to the grit, so you know at which phase of the work you reach for which plate.
A pair of steps makes sense because one grain is not enough for the whole operation. The coarser of them levels a sprue nub and an irregularity left by putty, the finer then smooths the traces that remain after the first step. Skipping one of the steps as a rule does not pay, because coarse scratches stand out under a coat and would have to be filled again.
A firm backing under the sanding sheet keeps the surface flat, which is exactly what you want on mold seams. Work in one direction and turn the model, not your hand. As soon as a sheet stops biting, replace it; trying to get the maximum out of a worn piece leads only to the surface being polished instead of sanded.
For the seam between the two halves of a fuselage set aside more time than seems necessary. That is exactly where the longest continuous line of the whole model runs and the eye finds it at once as soon as it is not perfectly straight. Proceed in short sections and look at a finished part against a window, where the reflection breaks on every ripple.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!