Plastruct half-round rod (Half Round Rod) in polystyrene, 2.4 mm high, 4.8 mm wide and 250 mm long is a modeling profile with a flat underside and a rounded top.
Responsibility details are not available.
A plastic profile of half-round section from Plastruct in polystyrene (styrene). The profile is 2.4 mm high, the flat base is 4.8 mm wide and the length is 250 mm. The straight underside glues conveniently onto a surface, while the rounded top makes a realistic reinforcement or edging.
The profile cuts easily with a sharp modeling knife or a saw and is glued with cement for polystyrene, which melts the surface and joins it, or with cyanoacrylate glue. The cut edges can be sanded and the surface takes modeling paints without trouble once a primer has been applied.
This is a modeling semi-finished material (a raw plastic profile), not a kit. Glue, paints and tools are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
