A photo-etched cargo compartment floor for the Mi-8MT in 1:48 scale from the Czech manufacturer Eduard replaces the smooth plastic part with a finely textured metal one.
Responsibility details are not available.
This is a photo-etched accessory from the Czech manufacturer Eduard for a plastic model of the Mi-8MT transport helicopter in 1:48 scale. According to the name the set is aimed at the floor of the cargo compartment, that is, at an area that is clearly visible on an open model and that in plastic tends to be simplified into a smooth panel. It is not a kit but an accessory for the basic kit.
The Mi-8MT is a transport helicopter of the Mi-8 family, designated Mi-17 in its export form. Its cargo cabin is a large open space, so the floor, its division and the tie-downs are among the most visible places on a model as soon as the doors or the rear clamshells are open.
Try the part out dry before gluing it in and sand the plastic floor flat as needed, so the photo-etched part seats without stress. It is glued with super glue applied in drops; on large areas reach for the variant with a longer setting time, so you have time to seat it. Degrease the metal surface and spray it with a primer, otherwise the paint will not hold on it. The texture of the floor comes out nicely if you bring it up after painting with a dark wash and suggest wear with a dry brush.
This is an accessory for a model. The base kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!