29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

Modřín , vysoký kmen 180-220 mm

Larch with a tall trunk is a finished handmade Model Scene model tree roughly 180 to 220 mm tall, ready to be set into a scene.

Manufacturer Model Scene
Product EAN8591111628655

Responsibility details are not available.

5.96 €
4.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Larch with a tall trunk, height 180 to 220 mm

This is a finished handmade model tree from the Czech manufacturer Model Scene. It is not a kit and not a loose scenery material — the tree is made, foliated and ready to be planted straight into a diorama, a layout or a display case. The height runs roughly between 180 and 220 mm, and it is the tall bare trunk with a high-set crown that defines this version. Because every piece is made by hand, small differences in the shape of the crown and the branching are natural and only do the look good.

The real subject

The larch is an unusual conifer — unlike the spruce and the pine it sheds its needles for the winter. It grows fast and tall, its trunk is straight, and in a closed stand the lower branches break off early, so exactly that typical tall clean trunk with the crown set high is what results. In Central Europe it is found in mountain and foothill forests, in mixed stands and in avenues. The summer needles are a light fresh green and softer than those of a spruce.

Tips for setting it into a scene

A tree of this height reads as dominant in a scene, so allow for it when designing the composition — it works best off the axis, as a framing element rather than in the middle. Sink the trunk into the terrain and hide the foot with turf, leaf scatter and small vegetation, so that the transition does not show. A tall trunk also allows a view under the crown, so it is worth finishing off the area beneath the tree. For greater naturalness, shape the branches slightly by hand and add fallen needles on the ground around the foot.

Who the model is for

  • Builders of dioramas who need a finished mature tree
  • Railroad modelers building forest and foothill sections
  • Modelers with no appetite for building a tree from an armature — this one is finished
  • Those who want a dominant compositional element in a scene

This is a finished scenery element, not a kit. The terrain substrate, the glue, the turf and any further vegetation are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a finished handmade tree that is planted straight into the terrain.

The height runs roughly between 180 and 220 mm, and the exact dimension differs slightly from piece to piece because of the handmade production.

The larch grows fast and in a closed stand breaks off its lower branches, so it has a long clean trunk and a crown set high.

Sink the trunk into the terrain and cover the transition with turf, leaf scatter and small vegetation, and add fallen needles if you like.

Last seen

Model SceneMK200

Modřín , vysoký kmen 180-220 mm

Larch with a tall trunk is a finished handmade Model Scene model tree roughly 180 to 220 mm tall, ready to be set into a scene.
In stock
5.96 €
EduardFE12421:48

1:48 Mikoyan MiG-21SMT Weekend

1:48 Mikoyan MiG-21SMT Weekend is a photo-etched accessory set from Eduard for detailing a model of this fighter in 1:48 scale. It is not a kit but an accessory for a model.
In stock
13.80 €
EduardED6483751:48

1:48 L-29 vystřelovací sedačky

L-29 Ejection Seats, 1:48 are a detail accessory set from manufacturer Eduard, designed to improve a plastic model of the trainer aircraft L-29 Delfín. It is not a model, but an accessory that requires the base kit.
In stock
13.80 €
1:48 Il-2 Stormovik Single Seater-25 %Stock ClearanceFavorite
EduardEX1941:48

1:48 Il-2 Stormovik Single Seater

Eduard Il-2 Shturmovik (single-seat) painting masks in 1:48 scale are a set of precisely shaped masks for clean spraying of the cabin glazing and other areas of the model of the Soviet Ilyushin Il-2 ground-attack aircraft in its single-seat version. The model is obtained separately.
2 leftof 4
3.80 €2.84 € You save 0.96 €
AMMO of Mig JimenezA.MIG-3020

35ml Metal Slag Pigment

AMMO Metal Slag Pigment is a fine loose pigment of 35 ml for the effect of slag-like, burnt metal rust and deposits on nozzles, exhausts and damaged metal.
In stock
3.96 €
HGWHGW2480811:48

1:48 F6F-3 Hellcat - Markingy + Popisky

HGW 1:48 F6F-3 Hellcat, markings and stencils is a set of wet transfers for a model of the Grumman F6F-3 Hellcat carrier fighter. After transfer the carrier layer is lifted off, so the markings look sprayed on rather than stuck on.
In stock
23 €
White Stork MiniaturesWSF720341:72

1:72 WWI British tankers

The 1:72 WWI British tankers set depicts British tank crews from the time of the first combat use of armored vehicles.
In stock
11.16 €
77propellerPRP302

“Wave” Kit -Quality paint stand – capacity 23 bottles (17ml)

The Wave paint stand with a capacity of 23 bottles of 17 ml from the manufacturer 77propeller is an organizer for the modeling bench — it comes as a set of parts to be assembled.
In stock
12.76 €
1:48 Do 215B-5 Nightfighter landing flaps-25 %Stock ClearanceFavorite
EduardED488671:48

1:48 Do 215B-5 Nightfighter landing flaps

A photo-etched detail set Do 215B-5 Nightfighter – landing flaps in 1:48 scale from the Czech manufacturer Eduard . It is not a model of an airplane but a set of photo-etched parts for a faithful rendition of the landing flaps of the Dornier Do 215B-5 night fighter.
Last one!
13.40 €10.04 € You save 3.36 €
CMKCMK40061:48

1:48 Me 410 B - control surfaces set for REV - MON

CMK Me 410 B, a movable control surfaces set 1:48 is a resin detail set that replaces the rudders and flaps of the German heavy fighter with separately cast parts.
In stock
11.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.