A coarse 180 grit on a rigid backing: Rigid Sanding Pads 180 grit from Green Stuff World comprise five pads for removing material quickly.
Responsibility details are not available.
The 180 grit removes material quickly, and that is why it stands at the beginning of every clean-up: sprue gate remains, mold flash, parting seams, the casting blocks of resin parts and excess cured putty. It saves the most time with a coarse grit on hard resin blocks, over which a finer paper tends to slide. In the package there are five pieces of 100 x 80 millimeters and five millimeters thick, and the foamed PVC backing does not flex under the pressure of your fingers.
A coarse grit removes noticeably, and that is exactly when there is a risk of rounding off an edge that is meant to stay sharp. A firm pad spreads the pressure into a plane, so only the projecting material disappears and the surroundings stay untouched. The abrasive layer covers both sides, so a pad is simply turned over and the work goes on without reaching for a new one.
After a coarse step always bring in a finer grit, or grooves will be left in the plastic that a gloss coat will emphasize mercilessly. Wipe the dust that arises off with a damp cloth or a soft brush. With resin and putties, prefer working under water and protect your airways, because dust from these materials irritates. The same pad can also level the underside of a plinth, so that a figure stands firmly and does not rock.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!