Track bed in sheets, intended for N scale model railroads. The sheet is cut to shape to follow the actual run of the track.
Responsibility details are not available.
Track-Bed is an underlay laid between the ground and the track. Thanks to it the track lies on a bed of its own, holds to one level, and the transition to the surrounding terrain is easy to disguise with scatter or grass material. The sheet form is aimed at places where a narrow strip is awkward to fit and where there is more than one track side by side: station areas, turnout areas, engine sheds and storage tracks.
Draw the shape out in pencil straight from the track piece and then cut the sheet with a sharp knife or scissors; curves run better as several shorter cuts than as one long one. Fix the underlay to the ground first, let the joint cure and only then set the track on it. Choose the glue by the manufacturer's instructions on the packaging, because solvent-based products can attack the ground. Once it is glued down, level the edges and run them smoothly into the surrounding terrain, so that the bed does not end in a sharp edge.
It comes into its own in building a layout and equally in building a diorama a track runs into. More experienced builders will cut shapes out of a sheet that are awkward to fit from a strip, the branching of tracks at turnouts or the area of a turntable for example. Anyone building a first layout will appreciate that the bed can be lifted and cut again at any time until it is glued down.
Track, glue and terrain material are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!