1:144 General Electric GE90-115 for B777

The resin detail set 1:144 General Electric GE90-115 for the Boeing 777 matches the most powerful form of the engine for the long-range versions of the aircraft. An accessory for a model, not a kit.

Scale1:144
Manufacturer LACI
Product EAN8591111000000

Responsibility details are not available.

23.96 €
19.80 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

General Electric GE90-115 for the Boeing 777 in 1:144 scale

Resin engine nacelles for a model of the Boeing 777 in 1:144 scale. The set replaces the parts from a base kit and is fitted to the pylons under the wing. It is not a model of the aircraft, but a detail accessory to one.

The engine and its installation

The form marked 115 is the most powerful member of the GE90 family and arose for the heaviest and longest-range versions of the Boeing 777, that is the stretched long-range subtype, the ultra-long-range variant and the freighter. Compared with the older form it has a noticeably larger fan, whose diameter approaches the width of the fuselage of a narrow-body airliner, so the nacelle looks unusually massive even in a small scale. The fan blades are composite and markedly curved. For the modeler this is an important distinction: both forms of the GE90 look similar at first glance, but they differ in the diameter of the intake and in the length of the nacelle, so the choice of set goes by the particular subtype of the aircraft being built, not just by the make of the engine. The engine hangs on a short pylon fairly low above the ground, which on the real subject is clearly apparent when seen from the front.

Working with resin

The larger a casting is, the more likely a small void left by air will appear in it. After cutting the pour block away, therefore, sand the surface over once first and only then fill, so that everything shows at the same time. Super glue sets quickly on resin; on larger areas the gel version is useful, or an activator applied to one of the parts, which fixes the joint in an instant. Before anything else, however, wash the mold release agent off the castings with warm water and dish soap. Do the sanding with a respirator; the fine dust from resin stays in the air for a long time.

Who the set is for

  • Builders of the long-range and freighter versions of the Boeing 777 in 1:144 scale
  • Modelers who tell the individual forms of the GE90 apart
  • More experienced builders used to large resin castings
  • Collectors of modern wide-body airliners

The accessory is supplied unassembled and unpainted. Glue, paints and the base model are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It has a markedly larger fan and a more massive nacelle. It arose for the heaviest long-range and freighter versions of the Boeing 777.

It depends on the subtype. The shorter long-range versions flew with the weaker form of the engine, which has a smaller intake. Check the engine of the particular machine.

Sand the surface over once first, so they all show at the same time, then fill and sand it over again.

Rather not. Work with resin calls for cutting pour blocks, super glue and respiratory protection while sanding.

Last seen

LACILAC1440231:144

1:144 General Electric GE90-115 for B777

The resin detail set 1:144 General Electric GE90-115 for the Boeing 777 matches the most powerful form of the engine for the long-range versions of the aircraft. An accessory for a model, not a kit.
In stock
23.96 €
I Love KitILK653061:350

1:350 USS John F. Kennedy CV-67

USS John F. Kennedy CV-67 in 1:350 scale is an extensive plastic kit of the American aircraft carrier from the I Love Kit brand, a large display project for experienced modelers.
In stock
177.56 €
Black Dog modelBDT352801:35

1:35 British cruiser tank A 34 Comet accessories set

An accessories set for the model of the British A34 Comet cruiser tank in 1:35 scale. An accessory to a kit, not a model on its own.
In stock
19.96 €
Dynamo-ModelsDNM351261:35

1:35 French Tanker Reading The Map 1940 No.2

French tanker reading the map 1940, No. 2 (1:35) is a resin figure of a French tank crewman from the start of the Second World War. It calls for assembly and painting.
In stock
13.96 €
AML DecalsAMLK720011:72

1:72 Canopy & Mask for Lavochkin La-5 (AML)

AML canopy and masks for the Lavochkin La-5 1:72 is a vacuum-formed clear canopy together with painting masks for models of the La-5 fighter.
In stock
2.36 €
HGWHGW5320301:32

1:32 4 Colour Lozenge - Faded

A 4 Colour Lozenge - Faded wet transfer in 1:32 scale from HGW with a four-color lozenge camouflage pattern. It is NOT a model, but a decor for imitating the German camouflage fabric of First World War aircraft.
In stock
10.04 €
AMTAMT14171:25

1:25 Chevy Titan 90 - Truck

AMT Chevy Titan 90 (1:25) is a plastic kit of an American long-haul tractor with a tilting cab and a sleeper.
In stock
73.96 €
MiniartMA356581:35

1:35 Wooden Barrels Small Size (20 pcs)

Wooden barrels – small size (1:35) is an injected plastic set of diorama accessories from the maker MiniArt. The package contains a set of small wooden barrels for bringing dioramas to life.
In stock
11.96 €
ZebranomodelZE720351:72

1:72 Humber Armoured Car Mk.IV

The Humber Armoured Car Mk.IV 1:72 is a resin kit of the British armored car for experienced modelers, completed by photo-etched parts and decals.
In stock
35.96 €
AberABR35A1191:35

1:35 PSP (Pierced steel planks) set

A photo-etched metal detail set, PSP panels, pierced steel planks , in 1:35 scale from the manufacturer Aber . A diorama accessory for building temporary roadways and surfaces.
In stock
11.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.