29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:32 AH-1G Cobra Inside/Outside MASK

1:32 AH-1G Cobra Inside/Outside masking set from Special Mask is intended for masking the glazing. The Inside/Outside designation means that the set deals with both the outer and the inner side of the cabin.

Scale1:32
Manufacturer Special Mask
Product EAN8591111000000

Responsibility details are not available.

6.36 €
5.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Masking set for the AH-1G Cobra in 1:32 scale (Special Mask)

A masking set from the maker Special Mask for a model of the AH-1G Cobra attack helicopter in 1:32 scale. It is not a model and not decals, but an aid to painting: the masks cover the glazing, so the cabin frames can be sprayed without going over them by hand with a brush. The Inside/Outside designation refers to the set being laid out for both sides of the glazing.

Why mask from the inside as well

The cabin of the AH-1G is slender, narrow and exceptionally glazed, so you can see into the interior from every angle. The glazing frames are meanwhile not the same on both sides: from inside they follow on from the color of the cabin, from outside from the external camouflage. When only the outside is masked, the inner side of the frames stays in the color of the clear plastic and the whole model gives itself away. Masking from both sides is extra work, but on a subject this glazed it is exactly the difference a viewer notices.

Usage tips

Wash the glazing before masking and let it dry thoroughly; grease from fingers makes masks hold unreliably. Lift the masks off with tweezers or the tip of a scalpel and press them down with a toothpick, so that the edge adheres; it is precisely under an unpressed edge that the paint runs under. Spray in thin coats, as a heavy coat creates a step and may lift off when the mask is removed. Take the masks off while the paint is freshly dry, not after several days. Paint the inner sides of the frames before you close the cabin onto the model.

Who the set is for

  • Builders of a model of the AH-1G in 1:32 scale who want sharp glazing frames
  • Modelers for whom going over the frames by hand with a brush takes too long
  • Anyone interested in a clean cabin interior visible through the glazing
  • Builders spraying with an airbrush who are bothered by paint running under

The set serves for masking during painting. The model, paints and thinners are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The set is laid out so that the glazing can be masked from both sides. The inner frames can therefore take the color of the interior and the outer camouflage stays sharp.

No. It is a masking set only; the model and paints have to be obtained separately.

The particular kit is not stated here. Before ordering we recommend checking the fit of the masks against the manufacturer's data.

As soon as the paint is dry to the touch. After a longer time the edge separates less well and there is a risk that the paint will come away with the mask.

Last seen

Special MaskM320051:32

1:32 AH-1G Cobra Inside/Outside MASK

1:32 AH-1G Cobra Inside/Outside masking set from Special Mask is intended for masking the glazing. The Inside/Outside designation means that the set deals with both the outer and the inner side of the cabin.
In stock
6.36 €
Aires/QuickboostQB725501:72

1:72 Mosquito seats with safety belts

Crew seats with belts for the Mosquito in 1:72 scale are a resin accessory that will replace the seats in a kit of the British two-seat de Havilland Mosquito. It is not a model but detail parts for the cockpit.
In stock
4.76 €
Figure Rise DBS Super Saiyan Broly Full Power -25 %Stock ClearanceFavorite
BandaiBAN55712

Figure Rise DBS Super Saiyan Broly Full Power

A plastic model of the character Broly in his Super Saiyan form, from the Dragon Ball Super world and from the Figure Rise modeling line. It is supplied as a set of parts for assembly.
Last one!
76.76 €57.56 € You save 19.20 €
EduardED64811001:48

1:48 Curtiss P-40E Warhawk tail wheel bay PRINT

Curtiss P-40E Warhawk tail wheel bay PRINT (1:48) is a resin 3D printed detail set from Eduard.
In stock
6 €
Aires/AerobonusAER4801811:48

1:48 Modern British Army Gunner for BAE Warrior

A resin figure of a modern British gunner for the BAE Warrior vehicle in 1:48 scale from Aerobonus, for military dioramas and display cases.
In stock
6 €
AviatticATT480181:48

1:48 (white decal paper for rib tapes) 5 colour "night lozenge" full pattern width for upper surface

Aviattic: a five-color night lozenge in the full width of the pattern for the upper surfaces, white backing, 1:48 : a decal sheet with night polygonal camouflage printed in complete widths of fabric, suitable for rib tapes as well.
In stock
16.36 €
EduardED6489291:48

Hurricane Mk.II cockpit door PRINT 1/48

A printed replacement for the cockpit entry door for a model of the Hawker Hurricane Mk.II in 1:48 scale. The thin wall and fine detail show above all with the door open.
In stock
3 €
KelikRSK32-00191:32

1:32 CR.42 LW - INTERIOR 3D DECAL FOR ICM KIT

CR.42 LW INTERIOR 3D DECAL is a three-dimensional decal from the Kelik brand for the interior of a model of the Italian biplane in 1:32 scale. Intended for the ICM kit.
In stock
17.16 €
Dead DesignNM481821:48

1:48 F-105 D Thunderchief - canopy frame paint mask (double sided)

Double-sided cockpit frame masks for the F-105D Thunderchief in 1:48 scale cover the glazing outside and inside, so the frame comes out equally clean from both views.
In stock
9.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.