A twin store carrier with BD3-USK racks in 1:32 scale from the manufacturer Reskit: a resin accessory set of two carriers for building up the external stores of modern jet aircraft.
Responsibility details are not available.
A resin accessory set from the Ukrainian manufacturer Reskit holding two twin store carriers with BD3-USK racks in 1:32 scale. It is not a model of an airplane nor the stores themselves; it is the rack equipment thanks to which the external load of your model will look complete and believable.
A twin carrier makes it possible to hang two bombs side by side on one pylon, which is the typical picture on machines of the Soviet and Russian design school. BD3-USK racks are a standard element of the external stores system of modern Russian combat aircraft. Kits often simplify these small but clearly visible elements or leave them out entirely; resin castings with sharp detail fill that gap, and in the large 1:32 scale they come out particularly well.
Wash the parts clean of mold release agent, cut the casting blocks off carefully and sand the cuts down. Glue with super glue (cyanoacrylate) and apply a primer before painting. Paint the carriers separately before fitting them to the pylons, because you reach all the surfaces more easily that way. A fine dark wash will bring out the structure of the casting and the technical detail of the racks.
This is an accessory set: the base model and the external stores are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
