1:35 Paint mask ASU-57

ASU-57 1:35 masking stencils (SX-Art)

A set of masking stencils for a model of the ASU-57 light self-propelled gun in 1:35 scale from the manufacturer SX-Art. It is not a kit and not decals. The stencils are laid on an already painted model and serve as a pattern for spraying a camouflage scheme or tactical markings. The pattern thus arises directly in the paint and on a matte surface looks more natural than a decal stuck on.

The real subject

The ASU-57 was a Soviet light self-propelled antitank gun from the 1950s, designed for airborne units. A 57 mm gun was mounted in an open superstructure on a very light tracked chassis, because the design had to be light enough for transport by air. Thanks to its small dimensions the vehicle is popular as an accessory for dioramas too, where it does not take up much room.

How the stencils are used

• Let the base paint cure fully, and only then apply the stencil
• Degrease the surface and rid it of dust, otherwise the stencil will not seat
• On small areas work with tweezers and press the stencil down along its whole edge
• Spray at a right angle, at a lower pressure and in thin coats
• Take the stencil off soon after the paint has set, pulling at a sharp angle
• Unify the pattern with varnish, and only then go on with patina

Who the set is for

• Modelers of ground vehicles in 1:35 scale
• Those who want to spray markings instead of sticking decals on
• Builders of smaller dioramas and display scenes
• Those interested in the vehicles of airborne units

The set contains the masking stencils alone. A model, paints and glue are not included in the package, unless stated otherwise.