Turned metal barrels of 380 mm/45 model 1935 in 1:350 are a set of nine barrels of a French naval gun from the manufacturer Flyhawk. It is not a ship kit but a detail accessory with which the plastic barrels of the main armament are replaced on a finished model.
Responsibility details are not available.
According to the name the set contains nine turned metal barrels of a French naval gun of 380 mm caliber with a barrel length of 45 calibers, model 1935. It is not a ship model and not a kit in its own right but an accessory for a build: the barrels are fitted into the gun turrets of a plastic model in place of the parts from the mold. Turned metal has two advantages over injection-molded plastic that are immediately visible on a finished model. The barrel is perfectly straight, with no mold parting line and no sink marks, and the muzzle is drilled, so you do not have to deal with the typically blind plastic end. It is precisely the long thin barrels of the main armament that are among the parts on battleship models in 1:350 where the difference between plastic and metal shows most.
The 380 mm gun with a length of 45 calibers, model 1935, was the main armament of the French battleships designed in the second half of the 1930s. A characteristic feature of those ships was the concentration of the main armament in quadruple turrets placed in the forward part of the hull. Nine barrels in the set are therefore enough to fit out two quadruple turrets completely, with one spare in case a part is damaged during fitting.
Cut the plastic barrel off as close to the turret mask as possible and carefully open the hole out with a micro drill to the diameter of the pin on the metal part. Metal does not hold on ordinary cement for plastic; use cyanoacrylate glue or a two-part epoxy, which gives more time to level the angle of elevation. Degrease the parts with alcohol before painting and apply a primer intended for metal, ideally a self-etching one, otherwise the paint holds poorly on the smooth surface. Leave fitting the barrels until the end of the build, so that they are not bent while the model is handled.
This is an accessory for a model, not a kit in its own right. The base model, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!