1:350 WWII Royal Navy 4.7in QF Mk XII Guns in Twin CPXIX Mounting (8 Pcs.)

1:350 WWII Royal Navy 4.7in QF Mk XII Guns in Twin CPXIX Mounting (8 Pcs.)

13.16 €
Add to Cart

1:350 WWII Royal Navy 4.7in QF Mk XII Guns in Twin CPXIX Mounting (8 Pcs.)

Metal barrels of the British 4.7 inch QF Mk XII gun in the twin CP Mk XIX mounting in 1:350 are a set of eight pieces from Flyhawk. An accessory for sharpening up the armament of a destroyer model, not a model in its own right.

Scale1:350
Manufacturer Flyhawk
Product EAN8591111000000

Responsibility details are not available.

13.16 €
10.88 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Barrels of the 4.7 inch QF Mk XII in a twin mounting, 1:350 scale (Flyhawk)

A set of eight turned metal barrels of the British quick-firing gun of 4.7 inch caliber, that is roughly 120 mm, in the Mk XII version intended for the twin CP Mk XIX mounting. Eight barrels correspond to four such mountings, which was the usual arrangement of the main armament of larger British destroyers. The product belongs among turned barrels and accessories, so it is an accessory for a plastic model rather than a ship model. The metal parts replace the plastic barrels from the mold and deal with their parting line and blind muzzle alike.

The real subject

The quick-firing gun of 4.7 inch caliber was the standard main armament of British destroyers of the interwar and wartime generation. The twin mounting was used on ships with a higher concentration of fire, where more barrels had to be got onto the deck without lengthening the hull. On a model these mountings are a prominent feature, because they stand right on the main deck and on the forward and after superstructures.

Usage tips

Cut the plastic barrel off as close to the mounting mask as possible, sand the area and open the hole out with a micro drill to the diameter of the pin. With smaller calibers work carefully, as the wall of the plastic part is thin and cracks if drilled roughly. Glue the metal in with cyanoacrylate glue, ideally a gel, which does not run into the surroundings. On a twin mounting check that both barrels have the same elevation and are parallel, otherwise it draws the eye at once on a finished model. Degrease before painting and use a primer for metal.

Who it is for

  • Builders of British destroyer models in 1:350.
  • Modelers who want an accurate muzzle and a straight axis on small barrels.
  • Collectors finishing a model for a display case.
  • More experienced modelers used to drilling small parts.

This is an accessory for a model, not a kit. The model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Eight barrels correspond to four twin mountings. Check the exact application for your particular model against your own kit, however.

Only the number of pieces is given for this item. Whether the package contains parts other than the barrels is not stated here, so count primarily on the barrels.

On metal use cyanoacrylate glue, ideally a gel, or a two-part epoxy. Cement for plastic will not hold a metal part.

Approximately 120 mm. British artillery was given in inches in period terminology.

Last seen

FlyhawkFH3500351:350

1:350 WWII Royal Navy 4.7in QF Mk XII Guns in Twin CPXIX Mounting (8 Pcs.)

Metal barrels of the British 4.7 inch QF Mk XII gun in the twin CP Mk XIX mounting in 1:350 are a set of eight pieces from Flyhawk. An accessory for sharpening up the armament of a destroyer model, not a model in its own right.
In stock
13.16 €
AIMSAIMS48PE0041:48

1:48 Junkers Ju-88 A-1/A-5 - early brake drum detail set (designed to be used with ICM kits)

1:48 Junkers Ju-88 A-1/A-5 - early brake drum detail set is a photo-etched set that makes the faces of the brake drums of the early versions of the bomber more accurate.
In stock
5.96 €
AberABR350L131:350

1:350 Set of 16 pcs 105 mm SFLAK barrels SKC/33 used in C/31 mount for German war ships

A set of 16 turned brass barrels of 105 mm SK C/33 caliber (1:350) from the Polish manufacturer Aber for models of German warships, anti-aircraft guns in the C/31 mount.
In stock
9.96 €
MASTERSM3501161:350

1:350 SMS Viribus Unitis armament - 305mm (12pcs), 150mm (12pcs) barrels, 70mm (18pcs) barrels (for Trumpeter kit)

A set of turned metal gun barrels for SMS Viribus Unitis (1:350) from MASTER: precise replacement gun barrels for refining a model of the Austro-Hungarian battleship. It is not a model.
In stock
19.56 €
ReskitRSU48-01721:48

1:48 BAC Lightning (F3, F5, F6, F53, T55) exhaust nozzle for AirFix

The resin detail set BAC Lightning F.3/F.5/F.6/F.53/T.55 — exhaust nozzles in 1:48 scale from Reskit. A replacement for the nozzles at the rear for Airfix Lightning kits; it is not an aircraft model.
In stock
19.56 €
AMMO of Mig JimenezA.MIG-8566

POLISHING SANDING STIKS

AMMO polishing sanding sticks combine a sanding and a polishing surface for removing flaws and smoothing all the way to a high gloss.
In stock
2.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.