LAST CHANCE! 20% OFF Ends Tonight!

1:48 BAe Harrier GR.1/3 TFace

An Eduard mask set for the BAe Harrier GR.1/3 in 1:48 scale in the TFace form, that is with masks for the outer and the inner face of the glazing. It is not a kit, but an accessory for a model.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

9 € 6.76 €
5.59 € without VAT
−25 % You save 2.24 €
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

BAe Harrier GR.1/3 TFace 1:48 mask set (Eduard)

Precisely shaped self-adhesive masks from the Czech maker Eduard, intended to cover the glazing and other areas of a model of the British Harrier GR.1/3 in 1:48 scale. The TFace description marks out the version that includes masks not only for the outer face of the cockpit but for its inner face as well, so that the frames look right when seen from inside too. The set on its own is not a model of the aircraft or a kit; it is an accessory used when painting an already built model.

The real subject

The BAe Harrier was the first series-built combat aircraft with the ability to take off vertically or from a short run. The powerplant is a Rolls-Royce Pegasus jet engine with vectored thrust, whose exhaust nozzles swivel and let the aircraft hover on the spot. The GR.1 version was the first combat form for the Royal Air Force, while the GR.3 was a modernization with improved equipment for reconnaissance and radar warning. Characteristic features of the type are the high-set swept wing, the tandem undercarriage and the outrigger wheels at the wingtips.

How to use the masks

Apply the masks only onto a cleaned, degreased surface of a finished part, ideally before spraying the base color. Press the edges down carefully with a toothpick or the blunt tip of tweezers, so that paint cannot get underneath. Apply the paint in thin layers; a heavy layer likes to peel away beyond the mask when it is lifted. Take the mask off while the finish is only just touch-dry, at a sharp angle and slowly. With the TFace version, stick the inner masks on first and only then close the cockpit up and mask it from the outside.

Who the set is for

  • Modelers who want clean, sharp cockpit framing without lining it by hand with a brush.
  • Builders who leave the cockpit open and can see inside it.
  • Those who want to save time against the labor of cutting shapes from masking tape.

This is an accessory for a model, not a model of an aircraft. The kit, paints and glue are not included in the package. We recommend checking the match with your own particular kit beforehand.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is the form of the mask set that includes masks for the outer and the inner face of the glazing. The frames then look right even when seen into an open cockpit.

It is not. It is a masking accessory meant for painting an already built model. The kit itself has to be bought separately.

The masks are cut to the shape of one particular model. The target kit is not stated here, so we recommend checking the match beforehand.

Best shortly after spraying, while the finish is only just touch-dry. Lift them slowly and at a sharp angle; that lowers the risk of the paint peeling.

Last seen

1:48 BAe Harrier GR.1/3 TFace-25 %Stock ClearanceFavorite
EduardEX7711:48

1:48 BAe Harrier GR.1/3 TFace

An Eduard mask set for the BAe Harrier GR.1/3 in 1:48 scale in the TFace form, that is with masks for the outer and the inner face of the glazing. It is not a kit, but an accessory for a model.
2 left
9 €6.76 € You save 2.24 €
AMKAMK880091:48

1:48 F-14D SUPERTOMCAT

An injection-molded plastic kit of the Grumman F-14D Super Tomcat in 1:48 scale from the manufacturer AMK (AvantGarde Model Kits) — the last and most modern version of the famous US Navy carrier fighter with swing wings.
In stock
67.96 €
AMKAMK860011:72

1:72 AERO L-29 Delfín

Aero L-29 Delfin 1:72 (AMK) is a detailed plastic kit of the Czechoslovak L-29 jet trainer in 1:72 scale.
In stock
14.36 €
MRP-A079 INTERIOR BRONZE - GREEN
-20 %
Favorite
Mr.PaintMRP-A079

MRP-A079 INTERIOR BRONZE - GREEN

Interior Bronze-Green is a dark bronze green for the interiors of American Second World War aircraft, from the water-thinnable Aqua acrylic range by Mr.Paint. A modeling paint for airbrush and brush, not a kit.
In stock
3.16 €2.53 € You save 0.63 €
RYE FIELD MODELRM20711:35

1:35 F.G.1250 IR Scope kit

RYE FIELD MODEL 1:35 F.G.1250 IR Scope kit is an accessory set of the German infrared night sight for models of late-war vehicles.
In stock
7.96 €
Hobby color - tmavě zelená
-20 %
Favorite
GunzeH320

Hobby color - tmavě zelená

A dark green acrylic tone for the camouflage of aircraft and ground vehicles. A jar with a volume of 10 ml, thinned with water or with Mr. Color Thinner, applied mainly with an airbrush.
In stock
3 €2.40 € You save 0.60 €
1:35 Ruined house base
-20 %
Favorite
Black Dog modelBDD350661:35

1:35 Ruined house base

A house ruin, a 1:35 diorama base is among the more striking scenic grounds. The building forms the focal point of the whole display.
In stock
23.96 €19.17 € You save 4.79 €
1:48 JAS-39 Gripen
-20 %
Favorite
EduardEX0501:48

1:48 JAS-39 Gripen

Eduard JAS-39 Gripen masks 1:48 is a die-cut self-adhesive masking set for a model of the Swedish JAS-39 Gripen multi-role fighter. It gives sharp color transitions on the glazing, the wheels and the camouflage. It is not a model but a masking aid.
In stock
5.20 €4.16 € You save 1.04 €
Changeling Rifle-25 %Stock ClearanceFavorite
BandaiBAN25732

Changeling Rifle

An add-on weapon for kits of robots from the Gundam circle. Which models it fits dimensionally is given in the maker's instructions.
Last one!
9.16 €6.88 € You save 2.28 €
Matho ModelsMATHO350521:35

1:35 Garbage Bags

1:35 Garbage Bags from Matho Models — miniature garbage bags for dioramas. An inconspicuous detail that will give a modern urban scene raw credibility.
In stock
5.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.