29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.
1:48 British universal carrier Mk.II.-GRILLS (TAMIYA)

1:48 British universal carrier Mk.II.-GRILLS (TAMIYA)

5.20 €
Add to Cart

1:48 British universal carrier Mk.II.-GRILLS (TAMIYA)

Hauler 1:48 British universal carrier Mk.II. GRILLS is a photo-etched set of cooling grilles for a plastic kit of the British Universal Carrier Mk.II in 1:48 scale.

Scale1:48
Manufacturer Hauler
Product EAN8591111780193

Responsibility details are not available.

5.20 €
4.30 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched cooling grilles for the Universal Carrier Mk.II 1:48

A small but conspicuously effective accessory: a set of photo-etched cooling grilles, cut for the Tamiya kit. It is not a model nor a complete detail set but a targeted replacement of one prominent place on the vehicle. The grille is, after all, exactly the part on which plastic can be recognized at first glance.

Why it is worth replacing the grilles

A real cooling grille is of thin sheet and it is see-through: light passes through it and behind it you sense the space of the engine. Injection-molded plastic cannot imitate that, so manufacturers only suggest the grille by engraving into a solid surface. The result reads as a blind plate and above all it has no depth. A photo-etched part has real holes, so once glued on there is darkness beneath it and the surface gains volume at once. On a vehicle with a central engine, such as the Universal Carrier, this area is moreover plainly on view.

Building tips

The original plastic grille usually has to be leveled flat: sand the surface smooth with abrasive on a flat piece of wood, so that the photo-etched part seats over its whole area. Do not glue the photo-etched part onto glue applied to the part itself, but wipe a drop of cyanoacrylate onto the tip of a wire and transfer it only to the edges; otherwise the glue will run into the holes and blind the grille. Degrease the metal before gluing and spray on a primer once it is glued. When painting, spray in short, thin passes from a greater distance, as a thick coat of paint will flood the holes just as reliably as glue. It is advisable to blacken the space under the grille beforehand.

Who the set is for

  • modelers who want to raise the realism of a model quickly and simply
  • builders who are bothered by the engraved imitation of a grille on a plastic part
  • beginners in working with photo-etched parts: the set is small and has no complicated bends
  • anyone interested in British hardware of the Second World War in 1:48

This is an accessory, not a kit. The base model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

As a rule it is enough to sand the surface of the original part flat, so that the photo-etched grille seats. The extent of the intervention differs according to how a particular kit has the part shaped.

Not when sprayed from a greater distance and in thin coats. The risk arises with thick paint applied by brush and with a heavy coat of varnish.

The set is calculated in shape for the Tamiya model. On another kit it may call for adjustment of the dimensions, and an exact fit is not assured.

Last seen

HaulerHLX480431:48

1:48 British universal carrier Mk.II.-GRILLS (TAMIYA)

Hauler 1:48 British universal carrier Mk.II. GRILLS is a photo-etched set of cooling grilles for a plastic kit of the British Universal Carrier Mk.II in 1:48 scale.
In stock
5.20 €
BrengunBRL481781:48

1:48 L-13 SE-SW VIVAT (BRENGUN)

Brengun L-13 SE/SW Vivat 1:48 is a photo-etched detail set for refining the plastic model of this powered glider. It is not a kit but an accessory for a basic kit.
In stock
8.76 €
AberABR352171:35

1:35 German medium tank Pz.Kpfw. III, Ausf J/L - vol. 1 - basic set

An Aber 1:35 photo-etched detail set for the German Pz.Kpfw. III Ausf. J/L tank (basic set) is a metal accessory for sharpening a plastic model; it is not a kit of its own.
In stock
13.96 €
1:32 North-American F-100F Super Sabre interior-25 %Stock ClearanceFavorite
EduardED329801:32

1:32 North-American F-100F Super Sabre interior

The 1:32 North American F-100F Super Sabre interior photo-etched set from the Czech manufacturer Eduard brings detail into the cockpit of the model that injection-molded plastic cannot capture.
4 left
27.80 €20.84 € You save 6.96 €
Quinta StudioQD481571:48

1:48 Yak-130 3D-Printed & coloured Interior on decal paper

Yak-130 1:48 interior 3D decal from Quinta Studio: a color cockpit decal with relief for the Russian trainer, without painting and without photo-etch. Made for the Zvezda kit.
In stock
18.36 €
Mark IMKM1440481:144

1:144 Bristol Beaufighter Mk.VIC (ITF) & TF Mk.X ‚Torpédový stíhač’

Bristol Beaufighter Mk.VIC and TF Mk.X 1:144 is an injection-molded plastic kit of the British twin-engine heavy fighter and torpedo aircraft from the maker Mark I Models.
In stock
18.36 €
HAIRANSHOKU (GREY INDIGO) 17ML-25 %Stock ClearanceFavorite
AK interactiveAK2262

HAIRANSHOKU (GREY INDIGO) 17ML

AK interactive Hairanshoku (Grey Indigo) acrylic modeling paint in a 17 ml bottle. A satin gray-blue shade from the palette of the Imperial Japanese Army Air Force of the Second World War.
2 leftof 4
3 €2.24 € You save 0.76 €
BrengunBRL1440881:144

1:144 F-14 Tomcat vacu canopy (Revell)

A vacuum-formed clear canopy for the F-14 Tomcat in 1:144 is a thin, clear replacement part for models of the American Grumman F-14 carrier-based fighter. Target kit: Revell.
In stock
5.16 €
Dead DesignVM481381:48

1:48 Mitsubishi A6M2a Reisen (In&Out)

1:48 Mitsubishi A6M2a Reisen (inner and outer face) is a Dead Design masking set for models of the early A6M2a version in 1:48 scale. According to the name it covers the glazing from the inner and the outer face.
In stock
8.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.