QMT 1:48 F-4E Phantom – wheel bay masks is a set of self-adhesive masks for painting the wheel bays of the F-4E machine in 1:48 scale.
Responsibility details are not available.
Die-cut self-adhesive masks intended for painting the wheel bays of the McDonnell F-4E Phantom machine in 1:48 scale. This is not a kit or parts for a model but an aid to painting that separates the shade of the inside of the bay from the outer finish. The specific number of masks and the extent of the coverage are stated on the manufacturer's packaging.
The masks have a fixed place in the painting sequence. After assembly and filling comes a filler primer over the whole model, then the inside of the bay is dealt with, including any shading, the paint is left to cure, and only then is the mask applied and the outer finish sprayed. The decals, the clear coat and the weathering follow only after the mask is off. Do not throw the sheet of die-cut masks away at once: as long as unused pieces remain in it, keep it flat and away from dust and direct sun, because the adhesive loses its grip over time and the paper or film backing curls. Once a mask has been lifted off, do not use it a second time, as it holds considerably worse and lets paint creep under.
The base has to be clean and degreased. Lay the mask with tweezers, run a blunt tip along the edge and spray perpendicular in thin coats. On jet machines the bays and the inner sides of the doors tend to be markedly lighter than their surroundings, and that is a transition on which every inaccuracy shows; check the specific shade against the scheme you are building.
The package contains masks only. The kit, the paints and the glue are not included in the delivery.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!