1:48 Nakajima Ki-27 Ko Vacu Canopy & Mask

Nakajima Ki-27 Ko — vacuum-formed canopy with masks 1:48 is an accessory set from Dead Design, not an airplane model.

Scale1:48
Manufacturer Dead Design
Product EAN8591111000000

Responsibility details are not available.

7.20 €
5.95 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Nakajima Ki-27 Ko — vacuum-formed canopy and masks 1:48 (Dead Design)

An accessory set, not an airplane kit. It consists of a vacuum-formed clear canopy and painting masks for the canopy frames in 1:48 scale. It replaces the injection-molded canopy from the base kit with a thinner and cleaner part and adds masks that make painting the frames easier. Working with a vacuum-formed part calls for precision, so the set is aimed at more experienced modelers.

What the set solves

The Ki-27 is one of those aircraft with a long, strongly glazed canopy where the thickness of the material shows at first glance. A thin vacuum-formed part rids the model of optical distortion and allows the canopy to be opened without the edge looking like a heavy wall. The masks supplied then take the place of tedious tape cutting and make sure the frames come out with sharp edges and with no paint running underneath.

Usage tips

Plan the whole procedure first: vacuum-formed parts are a one-shot job, so it pays to work slowly. Mark the parting line with a fine marker, cut the part out roughly with a margin and only then sand the edge down gradually on flat abrasive paper laid on a level board until the part seats exactly into the fuselage. The inside of the glazing is easier to finish before gluing — do any painting of the frames from the inside now. It is glued with a canopy glue that does not fog as it cures; liquid cyanoacrylate glue would cloud a clear part. Apply the masks to a degreased surface, press them down with a toothpick and lay the paint on in several light coats. Lift the mask while the paint is freshly dry, not a week later — by then it can tear the edge of the finish away.

Who the set is for

  • Builders of Japanese fighters in 1:48 scale
  • Modelers who want realistically thin glazing and an open canopy
  • More advanced modelers with experience of vacuum-formed parts
  • Those who do not want to lose time masking frames by hand

This is an accessory set, not an airplane model. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is an accessory set with a vacuum-formed canopy and masks; you have to have the base kit of your own.

Cut it out with a margin and sand the edge down gradually on flat abrasive paper until the part seats into the fuselage.

While the paint is freshly dry. After a long time the mask tears the edge of the finish away and the edge frays.

The number of parts and masks is given by the illustration on the packaging of the set.

Last seen

Dead DesignCM480121:48

1:48 Nakajima Ki-27 Ko Vacu Canopy & Mask

Nakajima Ki-27 Ko — vacuum-formed canopy with masks 1:48 is an accessory set from Dead Design, not an airplane model.
In stock
7.20 €
Red Fox StudioRFSQS-350401:35

1:35 Bell UH-1B Huey (for Trumpeter kit)

In stock
18.76 €
Voyager ModelFE350351:35

1:35 WWII German SturmTiger Zemmerit(For RMF 5012)

SturmTiger Zimmerit 1:35 is a photo-etched set for a faithful imitation of the anti-magnetic Zimmerit coating on models of the SturmTiger heavy assault vehicle.
In stock
15.16 €
1:32 Messerschmitt Bf-108 national insignia-25 %Stock ClearanceFavorite
EduardEDD320011:32

1:32 Messerschmitt Bf-108 national insignia

1:32 Messerschmitt Bf-108 national insignia is a decal sheet with national insignia for a model in 1:32 scale — a printed accessory, neither a kit nor a masking set.
8 left
7.80 €5.84 € You save 1.96 €
Model MakerMM-IM327031:32

1:32 HAWKER HURRICANE ROUNDELS AND FIN FLASHES - EARLY

In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.