1:48 Sikorsky HH-34J cargo seatbelts STEEL

1:48 Sikorsky HH-34J cargo seatbelts STEEL is a set of photo-etched seat belts in steel for the cargo compartment of a model of the American helicopter. It is an accessory to a plastic kit, not a model.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

7.80 €
6.45 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched seat belts for the Sikorsky HH-34J in 1:48 scale

The package holds photo-etched seat belts intended for the cargo compartment of a model of the HH-34J helicopter in 1:48 scale. The designation STEEL in the name refers to the fact that the belts are etched from steel rather than from the commonly used brass. Steel sheet is harder and springier, so once shaped it holds its form better and a belt then drapes naturally over a seat instead of standing up like sheet metal. The set does not replace a kit; it is a small but highly visible interior detail that on a helicopter with a glazed cabin and open doors is more visible than on an airplane.

The real subject

The Sikorsky HH-34J was a rescue and search derivative of the piston-engine helicopter of the H-34 series, that is of a machine with a radial engine placed in the nose and a shaft led diagonally up to the main rotor. Its hallmarks are the tall, deep cabin with a large cargo compartment and the four-blade main rotor. It is precisely the roomy interior that makes seat belts and other internal details a rewarding item on a model.

Building and painting tips

Steel photo-etch is harder than brass, so have a really sharp scalpel ready for separating the parts from the fret and cut on a hard surface; a blunt edge will bend the sheet rather than cut it. Shape the belts with round tweezers or a stick and aim for a slight, irregular sag, as a perfectly straight belt looks unnatural. If the parts are already pre-colored from the factory, do not spray over them and merely pick them out carefully once fitted with a dark wash and a dry brush on the edges of the buckles; if they are in bare metal, degrease them and use a primer for metal. They are attached with super glue in the smallest drops applied with a pin, as on belts a real minimum is enough and an excess is very hard to correct on such a small part. Fit the belts before the cabin is closed up, but as late as possible within the interior work, so that they do not bend during the rest of the job.

Who the set is for

  • Modelers building the HH-34J helicopter in 1:48 scale
  • Those building a model with the doors open and the cargo compartment visible
  • Anyone interested in raising the interior detail quickly without major surgery on the model
  • Modelers who are bothered by plastic or decal substitutes for belts

The set is an accessory to a plastic kit. The model itself, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

That the parts are etched from steel instead of the usual brass. Steel is harder and springier, so a shaped belt holds its sag and does not spring back flat.

It is not. These are only photo-etched belts. The HH-34J plastic kit in 1:48 scale has to be obtained separately.

It depends on the finish of the particular package. If the parts are already pre-colored from the factory, picking them out with a wash once fitted is enough; bare metal has to be degreased and sprayed with a primer for metal.

Bend the belt slightly over a round tool and let it drape freely over the edge of a seat. Irregularity and a light twist read more realistically than a straight line.

Last seen

EduardFE11341:48

1:48 Sikorsky HH-34J cargo seatbelts STEEL

1:48 Sikorsky HH-34J cargo seatbelts STEEL is a set of photo-etched seat belts in steel for the cargo compartment of a model of the American helicopter. It is an accessory to a plastic kit, not a model.
In stock
7.80 €
EduardFE12801:48

1:48 Bell AH-1G Cobra seatbelts STEEL

1:48 Bell AH-1G Cobra - steel seat belts (STEEL) are color-printed Eduard photo-etched belts in steel for a faithful cockpit on a model of the attack helicopter. It is not a kit.
In stock
6.80 €
EduardFE13531:48

1:48 Mi-17 seatbelts STEEL

Eduard STEEL photo-etched colored seat belts for Mi-17 helicopter models in 1:48 scale raise the realism of the cabin.
In stock
6.80 €
EduardFE12841:48

1:48 A-1H seatbelts STEEL

Photo-etched seat belts in the steel version for a model of the A-1H attack aircraft in 1:48 scale. An accessory for an open cockpit.
In stock
6.80 €
EduardFE13571:48

Mi-8MT seatbelts STEEL 1/48

Eduard 1:48 Mi-8MT seatbelts STEEL are pre-painted photo-etched steel seat belts for faithfully finishing off the cockpit of a model of the Mi-8MT helicopter.
In stock
6.80 €
Mi-8MT cargo seats 1/48-25 %Stock ClearanceFavorite
EduardED4811121:48

Mi-8MT cargo seats 1/48

A photo-etched set of cargo compartment seats for the Mi-8MT in 1:48 scale from the Czech manufacturer Eduard refines the cabin fittings of a plastic model.
2 left
23.60 €17.72 € You save 5.88 €
Mi-8MT cargo floor 1/48-25 %Stock ClearanceFavorite
EduardED4811111:48

Mi-8MT cargo floor 1/48

A photo-etched cargo compartment floor for the Mi-8MT in 1:48 scale from the Czech manufacturer Eduard replaces the smooth plastic part with a finely textured metal one.
2 left
20.80 €15.60 € You save 5.20 €
Mi-8MT 1/48-25 %Stock ClearanceFavorite
EduardED4913561:48

Mi-8MT 1/48

A set of photo-etched parts in 1:48 scale for a model of the Mi-8MT helicopter. It adds thin metal elements to the model of a kind that cannot be molded in plastic.
2 leftof 3
21.40 €16.04 € You save 5.36 €
AMMO of Mig JimenezA.MIG-8422

TERRAFORM Cork Rock Thick

TERRAFORM Cork Rock Thick is a loose scatter material by AMMO of Mig Jimenez with a coarse grade, intended for rock faces and broken-off pieces of stone on dioramas.
In stock
4.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.