20% OFF Sale Until Wednesday! 

MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO • HGW • DEAD DESIGN • FIRMA49 • KOVOZÁVODY PROSTĚJOV • AZ MODEL • RS MODELS

 Sale Ends Wednesday, November 11, 2026!

1:48 Supermarine Spitfire Mk.II landing flaps

Eduard 1:48 Supermarine Spitfire Mk.II landing flaps is a photo-etched set of landing flaps for a model of the British fighter in 1:48 scale.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

14 € 10.52 €
8.69 € without VAT
−25 % You save 3.48 €
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard 1:48 Supermarine Spitfire Mk.II — photo-etched landing flaps

A photo-etched detail set from the Czech manufacturer Eduard in 1:48 scale. It is not a kit of the aircraft but an accessory that replaces the plastic landing flaps with thin etched metal. On the Spitfire this detail is especially rewarding: its flaps were operated pneumatically and had only two positions, up and fully down, so a lowered flap is a striking and unmissable feature of a standing aircraft. A plastic part is too thick for this purpose and its inner side is empty. Check that it matches your kit beforehand against the information on the packaging of the set.

The real subject

The Supermarine Spitfire Mk.II is a British single-engine fighter of the early 1940s, a production version following on from the first series Spitfires. Its characteristic features are the elliptical wing, a liquid-cooled V12 engine and a slender fuselage. The Mk.II version differed from its predecessor above all in a more powerful powerplant and in production modifications.

Building and painting tips

The plastic flaps usually have to be cut out of the wing and the recess cleaned up; the operation is irreversible, so try it dry first. Cut the parts off with photo-etch scissors or cut them out with a scalpel, and make the bends in a bending tool. They are glued with cyanoacrylate glue or with epoxy; cement for plastic will not join metal. Degrease the metal before painting and spray it with a primer. Paint the inner side of the flap and bring it out with a dark wash before you seat it on the wing. Watch that both flaps are at the same angle — any asymmetry is immediately visible from behind.

Who the set is for

  • Builders of models of fighters in 1:48 scale.
  • Modelers who want to build a Spitfire with the flaps lowered.
  • More experienced builders willing to cut into plastic parts.
  • Those interested in a scale-faithful thickness of the control surfaces.

This is an accessory for a model. The model itself, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a photo-etched accessory for a model; the kit is not included in the package.

As a rule yes. The plastic flaps are cut out of the wing so that the etched part can be fitted. The operation is irreversible.

The flaps had only two positions, up and fully down, so a lowered flap is a conspicuous and faithful feature of a standing aircraft.

The number of parts is given on the packaging of the set.

Last seen

1:48 Supermarine Spitfire Mk.II landing flaps-25 %Stock ClearanceFavorite
EduardED4810551:48

1:48 Supermarine Spitfire Mk.II landing flaps

Eduard 1:48 Supermarine Spitfire Mk.II landing flaps is a photo-etched set of landing flaps for a model of the British fighter in 1:48 scale.
Last one!of 6
14 €10.52 € You save 3.48 €
Aires/QuickboostQB725011:72

1:72 Bristol Blenheim I/IV undercarriage covers

Landing gear doors for the Bristol Blenheim I/IV 1:72 (Quickboost) is a resin aircraft accessory in 1:72 scale. It is not an airplane model but a detail part. It is supplied unassembled and unpainted.
In stock
4.76 €
Abrex143ABX-038XB11:43

1:43 Škoda Octavia IV Combi (2020) - MP Ostrava

A collector die-cast model of the Skoda Octavia IV Combi (2020) in municipal police form in 1:43 scale from Abrex — a finished model, not a kit.
In stock
39.80 €
BroncoCB351261:35

1:35 Hungarian Medium Tank 43.m Turan III

The Bronco 1:35 plastic kit of the Hungarian 43M Turán III medium tank captures a lesser-known armored vehicle of the Second World War.
In stock
39.96 €
1:16 Browning .50 caliber (12.7mm) - cartridges (25pcs)
-20 %
Favorite
MASTERGM160021:16

1:16 Browning .50 caliber (12.7mm) - cartridges (25pcs)

A set of 25 turned metal cartridges of .50 caliber (12.7 mm) for the Browning machine gun in 1:16 scale. An accessory for a diorama and for detailing models, not a kit.
In stock
12.76 €10.21 € You save 2.55 €
1:32 Kii-27 Otsu Nate Over Malaya and..
-47 %
Favorite
SaleV-SH320401:32

1:32 Kii-27 Otsu Nate Over Malaya and..

Nakajima Ki-27 Otsu Nate (Over Malaya) is a plastic kit of the Japanese army fighter with its characteristic fixed landing gear, in 1:32 scale.
In stock
47.16 €25.16 € You save 22 €
Voyager ModelFE350351:35

1:35 WWII German SturmTiger Zemmerit(For RMF 5012)

SturmTiger Zimmerit 1:35 is a photo-etched set for a faithful imitation of the anti-magnetic Zimmerit coating on models of the SturmTiger heavy assault vehicle.
In stock
15.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.