A thin-walled brass tube with an outside diameter of 1.7 mm and an inside diameter of 1.5 mm, 305 mm long. The wall is 0.1 mm. Suitable for barrels, antennas and lines. Supplied as one piece.
Responsibility details are not available.
A drawn brass tube with an outside diameter of 1.7 mm and an inside diameter of 1.5 mm. The wall is therefore a mere tenth of a millimeter, and even so the material keeps a stiffness a plastic rod will never have. It comes as a single piece 305 millimeters long, which covers several projects at once.
Metal takes being sanded down to a sharp edge at the muzzle, it does not ripple in heat and, once fitted to a model, it needs no filling of a parting seam. The thin wall also gives weapon muzzles and exhausts a convincingly fine edge that cannot be made from a plastic part split in two.
The range of sizes is graded in tenths of a millimeter, so the inside bore of 1.5 mm takes a tube of exactly the same outside diameter. That makes it possible to build telescopic assemblies with a visible step without having to sand anything down.
It can be parted with a tube cutter or with a thin saw blade with support, and the inside burr is removed after the cut with the tip of a knife. It can be held with super glue, and a stronger joint comes from soldering. Before painting it is worth degreasing the surface and using a primer intended for metal, otherwise the paint will not hold on smooth brass.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
