20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more
1:700 USS Yorktown CV-10 Wooden Deck (for Trumpeter kit 05729)

1:700 USS Yorktown CV-10 Wooden Deck (for Trumpeter kit 05729)

17.16 €
Add to Cart

1:700 USS Yorktown CV-10 Wooden Deck (for Trumpeter kit 05729)

An Artwox Model 1:700 wooden deck for a model of the aircraft carrier USS Yorktown CV-10 is a sheet of thin veneer with pre-printed plank laying and a self-adhesive backing, which goes straight onto the plastic flight deck of the Trumpeter 05729 kit.

Scale1:700
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

17.16 €
14.18 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Wooden deck USS Yorktown CV-10 1:700 (Artwox Model)

This is an aftermarket accessory, not a kit. The sheet is made of thin wooden veneer with the laying of the individual planks pre-printed on it, and it is fitted with a self-adhesive backing. It goes straight onto the plastic flight deck of the kit it is cut for. The set is cut for the Trumpeter 05729 kit, so check before buying that you have exactly that model.

What the deck changes on the model

On a model of an aircraft carrier the flight deck is the largest continuous area and it decides the overall impression of the finished display piece. Painted plastic on it always comes across as uniform, because the paint merely follows the engraving. Veneer, by contrast, has a pattern of its own and slight differences of shade between planks, so the area comes alive without any painting at all. The accurately cut outlines also solve the most laborious part of the work, that is, the boundaries of the deck and the cut-outs for the elevators and superstructures.

Gluing tips

A clean base is the foundation. Sand the plastic deck lightly first with very fine paper, wash it with lukewarm water and a drop of detergent and let it dry out completely. Traces of grease from the hands are the commonest reason why a corner of the veneer lifts later. Lay the sheet on dry first and find a guiding axis, ideally the longitudinal axis of the deck. Take the covering film off gradually, not all at once, and lay the veneer from the middle out to the edges, so that no air bubbles form under it. Press down with a flat wooden stick, not with a fingernail.

Who the set is for

  • Modelers who want a flight deck with the texture of real wood
  • Builders of 1:700 ships who are not happy painting engraved plastic
  • Display models, where the deck is the most exposed to the eye
  • Newcomers to aftermarket, because gluing needs no soldering or cutting of etching

This is an accessory for a plastic kit. The kit itself, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. This is an accessory, that is, the wooden deck alone, which you glue onto a plastic kit you have already bought. The kit is not part of the package.

You do not have to paint it; the veneer has the shade of wood of its own. Many modelers go over it with matte varnish at the end to protect it from dirt and fingerprints, but it is not compulsory.

Do not rely on it. The outlines are cut to the Trumpeter 05729 kit, and even models of the same ship from another maker differ in the detail of their dimensions.

No, the sheet has a self-adhesive layer of its own. A clean, degreased base and patient laying from the middle are enough.

Last seen

Artwox ModelBW200071:700

1:700 USS Yorktown CV-10 Wooden Deck (for Trumpeter kit 05729)

An Artwox Model 1:700 wooden deck for a model of the aircraft carrier USS Yorktown CV-10 is a sheet of thin veneer with pre-printed plank laying and a self-adhesive backing, which goes straight onto the plastic flight deck of the Trumpeter 05729 kit.
In stock
17.16 €
IBG modelsIBG720521:72

1:72 40/43M Zrinyi II - Hungarian 105mm Assault Gun with sideskirts

IBG 1:72 40/43M Zrínyi II is an injection-molded plastic kit of the Hungarian 105 mm assault gun with side skirts.
In stock
13.16 €
Artwox ModelBW100131:350

1:350 USS Hawaii CB-3 Wooden Deck (for Hobby Boss kit 86515)

A wooden deck for a model of USS Hawaii CB-3 in 1:350 scale - a veneer sheet with pre-printed plank laying and a self-adhesive backing, meant for the plastic deck of the kit. The target kit is Hobby Boss 86515.
In stock
31.16 €
Artwox ModelBW100181:350

1:350 German Battleship Scharnhorst 1940 Wooden Deck (for Dragon kit 1062)

A wooden deck for a model of the battleship Scharnhorst as of 1940, 1:350 scale - a self-adhesive veneer with pre-printed plank laying instead of the engraved plastic deck. The target kit is Dragon 1062.
In stock
35.16 €
Artwox ModelBW200121:700

1:700 USS Texas BB-35 Wooden Deck (for Trumpeter kit 06712)

An Artwox Model 1:700 wooden deck for a model of the battleship USS Texas BB-35 is a self-adhesive veneer sheet with pre-printed plank laying in the natural shade of wood.
In stock
14.36 €
Kits-WorldKW3D1720311:72

1:72 Blackburn Bucanneer S.2 B/C Seat Harness (for Airfix kits)

A set of seat restraint belts for a model of the Blackburn Buccaneer S.2B and S.2C in 1:72 scale, cut for Airfix kits.
In stock
7.96 €
1:24 Isuzu Gemini (JT190) irmscher 1988-25 %Stock ClearanceFavorite
HasegawaHAHC261:24

1:24 Isuzu Gemini (JT190) irmscher 1988

Hasegawa 1:24 Isuzu Gemini (JT190) Irmscher 1988 is a plastic kit of the Japanese Isuzu Gemini hatchback in the version with the Irmscher treatment.
Last one!
29.96 €22.48 € You save 7.48 €
HAD modelsHAD722091:72

1:72 Saab J-39 C/D Gripen Hungarian Air Force, Tigermeet

1:72 Saab J-39 C/D Gripen Hungarian Air Force, Tigermeet is a set of water-slide decals in 1:72 scale for the Saab Gripen fighter of the Hungarian Air Force in the Tiger Meet coloring.
In stock
13.96 €
1:32 F/A-18F early 3D-Printed & coloured Interior on decal paper (Trumpeter)-25 %Stock ClearanceFavorite
Quinta StudioQD321231:32

1:32 F/A-18F early 3D-Printed & coloured Interior on decal paper (Trumpeter)

F/A-18F early 3D printed and colored Interior 1:32 is a colored 3D printed set of interior detail on decal paper from Quinta Studio. The elements are not self-adhesive; they are transferred from water. Target kit: Trumpeter.
4 leftof 6
63.56 €47.68 € You save 15.88 €
Border ModelBS-0061:350

1:350 Kongo - Imperial Japanese Navy Fast Battleship

Border Model 1:350 Kongo is a modern injection-molded kit of the Japanese fast battleship from a new mold. The finished model measures around 61 cm and the package also holds photo-etch and 3D printed parts.
In stock
151.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.