1:72 Mig-25 RU Basic kabuki masks

New Ware 1:72 MiG-25 RU Basic kabuki masks is a basic set of pre-cut masking stencils of kabuki paper for the model of the two-seat MiG-25 RU in 1:72 scale.

Scale1:72
Manufacturer New Ware
Product EAN8591111000000

Responsibility details are not available.

5.40 €
4.46 € without VAT
5 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

New Ware 1:72 MiG-25 RU, the basic set of kabuki masks

A basic masking set from the Czech maker New Ware for the model of the two-seat MiG-25 in 1:72 scale. The package does not contain a kit; it is an accessory for painting. The Basic release is the simplest of the trio Basic, Advanced and Expert, which differ from one another in the extent of coverage. The specific list of masked areas and the number of masks on the sheet are given in the instructions with the set.

The real subject

The MiG-25 is a twin-engine aircraft designed for very high speeds and altitudes, with a characteristic angular fuselage, side air intakes and a pair of vertical tail surfaces. The version with the designation RU is a two-seat trainer modification derived from the reconnaissance branch of the type, on which a second cockpit was added, placed ahead of the original one. It is precisely this element that changes the shape of the upper part of the nose and with it the extent of the glazing that is masked on the model, which is why the masks for the two-seat version differ from the masks for the single-seat variants.

Usage tips

Kabuki paper is a thin Japanese paper with a low-tack adhesive. It adheres enough to hold an edge, but not so much that on removal it tears off paint or fogs the glazing. Before sticking it down, degrease and dry the glazing; even slight grease from the fingers is enough for a mask to stand off along the edge. A two-seat cockpit means two sets of curves close to each other, so lay the masks out on a surface in advance and assign them to the individual panels, so that they do not get mixed up during application. Apply the paint perpendicularly to the edge of the mask, not at an angle under it; that lowers the risk of running underneath. After spraying, remove the masks while the paint is still only tacky.

Who the set is for

  • Builders of the two-seat MiG-25 in 1:72 scale
  • Modelers who want sharp frames of the glazing with no tracing by hand
  • Those interested in basic coverage rather than the wider sets
  • Those who mask with an airbrush

This is a masking set, not a kit. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is a two-seat trainer modification of the MiG-25 type derived from the reconnaissance branch, with a second cockpit placed ahead of the original one.

No. The package contains only masking stencils; the kit has to be obtained separately.

They differ in the extent of coverage, which grows from Basic to Expert. The specific list of areas is given in the instructions with the set.

Kabuki paper has a low-tack adhesive. You lower the risk by removing the mask while the paint is still only tacky and by pulling it back over itself at a sharp angle.

Last seen

New WareNWAM07791:72

1:72 Mig-25 RU Basic kabuki masks

New Ware 1:72 MiG-25 RU Basic kabuki masks is a basic set of pre-cut masking stencils of kabuki paper for the model of the two-seat MiG-25 RU in 1:72 scale.
In stock
5.40 €
37 MS (EARTH FEDERATION SPACE FORCE)-25 %Stock ClearanceFavorite
BandaiBAN61139

37 MS (EARTH FEDERATION SPACE FORCE)

An accessory item from a modeling range for the Gundam world, tied thematically to the mobile suits of the Earth Federation.
Last one!
6.36 €4.76 € You save 1.60 €
GAS HANSGH-NB16005

Bullet-Proof Cone Rivet 0.7 mm

A 0.7 mm armored cone rivet from the brand GAS HANS holds 171 printed heads, the most of all the sizes offered from seven tenths of a millimeter up. The hole is drilled at 0.5 mm.
In stock
3.16 €
Aires/QuickboostQB480811:48

1:48 C-47 Dakota engines

Quickboost 1:48 C-47 Dakota engines is a resin accessory with finely cast radial engines for a plastic model of this transport aircraft.
In stock
11.56 €
EduardED111811:48

1:48 OVERLORD: D-DAY MUSTANGS

Overlord: D-Day Mustangs 1:48 is a plastic kit of the P-51 Mustang fighter from the Czech manufacturer Eduard, devoted by theme to the machines deployed over Normandy in 1944.
In stock
64 €
MineshimaMNS-L10-25

Drill Bit 2.5mm L10-25

The Mineshima 2.5 mm drill bit is a single modeling bit for drilling into injection-molded plastic, where feel and speed matter more than force.
In stock
3.56 €
MIG productionsMP35-2751:35

1:35 CONCRETE BARRIERS (JERSEY TYPE)

Concrete Jersey barriers in 1:35 scale are a resin scenic accessory from MIG productions for modern dioramas and display bases.
In stock
11.96 €
AiresAIR44651:48

1:48 P-47D Razorback cockpit set

The resin detail set Aires P-47D Razorback cockpit in 1:48 scale. A complete cockpit for experienced modelers; it is not an airplane model.
In stock
16.80 €
Print ScalePRSC724051:72

1:72 Sepecat Jaguar GR.1

An extensive sheet in 1:72 scale with sixteen markings for the British Jaguar strike aircraft. Its core is eleven machines of squadrons 6, 41 and 54 from the desert operations of 1991 with nose art and mission tallies, supplemented by later options from the years 1985 to 2005.
In stock
14.76 €
EduardCX0511:72

1:72 Ki-45 Toryu/ Nick

Eduard masks Ki-45 Toryu 1:72 is a die-cut self-adhesive masking set for a model of the Japanese Ki-45 Toryu heavy fighter. It gives crisp color transitions on the glazing, the wheels and the camouflage. It is not a model but a masking aid.
In stock
4.40 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.