20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more
1:32 Boeing B-17F Flying Fortress 3D Full colour Instrument Panel

1:32 Boeing B-17F Flying Fortress 3D Full colour Instrument Panel

25.16 €
Add to Cart

1:32 Boeing B-17F Flying Fortress 3D Full colour Instrument Panel

Kits-World 1:32 Boeing B-17F Flying Fortress 3D full-color Instrument Panel is a full-color three-dimensional instrument panel on decal paper for the cockpit of a model in the large scale.

Scale1:32
Manufacturer Kits-World
Product EAN9591111000054

Responsibility details are not available.

25.16 €
20.79 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Boeing B-17F Flying Fortress, a full-color 3D instrument panel 1:32

It is neither a kit nor a part to be glued. This is a full-color print of an instrument panel with a three-dimensional relief, printed on decal paper and applied into a cockpit as a decal. In 1:32 scale the pilot's compartment stays clearly visible once the fuselage is closed up, so it is precisely the panel that carries the greatest part of the resulting impression of the interior.

Where the design belongs and how it fits

The design aims exactly at the surface of the cast instrument panel in the kit. Before gluing, check the position with a dry fit: the edges of the print must coincide with the outline of the plastic part, not with the frame around it. The raised cast circles of the instruments usually get in the way; if the base is not smooth, the print will stay standing on them and a silvery edge will form around the rim. Sand the surface fully, then, or at least level the tops of the relief, so that the three-dimensional layer of the decal seats onto a flat surface. With a bomber with a roomy pilot's cockpit, count also on the panel adjoining sprayed surfaces of the interior: choose the shade of the surroundings so that it does not come across as plastic against the printed panel.

Application procedure

The base has to be glossy; on matte paint air is held under the decal and silvering arises. Soak the decal in warm water only until it releases from the backing, move it into place with a brush and draw the excess water off with the edge of a paper towel. Dose the softener sparingly and drop by drop: a three-dimensional layer reacts differently from a thin classic decal and if it is flooded it can ripple. Once it is perfectly dry, go over the surroundings with a matte varnish and leave the glasses of the instruments themselves glossy, or accentuate them with a drop of gloss varnish.

Who the set is for

  • modelers who want a full-color cockpit without photo-etched parts and hand-painting dials
  • builds in a large scale where the interior is visible
  • more experienced builders used to working with a softener

An accessory for a model. The base kit, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is applied like a decal: it is soaked in water and transferred onto the surface of the instrument panel. It has a three-dimensional relief, though, so it needs a flat and glossy base.

As a rule yes, at least partly. Raised dials prevent it from seating and air would be left under the print. Always a dry fit first, then sanding.

Several instrument panels exist for one type of aircraft. Choose according to the exact designation of the version and according to the part number.

Varnish the base with a gloss varnish, lay the decal onto a damp surface, push the water out from under it and use a softener. The matte varnish only at the end.

Last seen

Kits-WorldKW3D13210231:32

1:32 Boeing B-17F Flying Fortress 3D Full colour Instrument Panel

Kits-World 1:32 Boeing B-17F Flying Fortress 3D full-color Instrument Panel is a full-color three-dimensional instrument panel on decal paper for the cockpit of a model in the large scale.
In stock
25.16 €
Chameleon Gold-Green
-20 %
Favorite
Mr.PaintMRPC027

Chameleon Gold-Green

Chameleon Gold-Green is a chameleon shade from Mr.Paint out of the automotive range, which shifts between a gold and a green tone according to the angle of view. It is a lacquer-type paint prepared for an airbrush.
In stock
9.96 €7.97 € You save 1.99 €
PANZER ARTRE35-6361:35

1:35 M4 “Sherman” road wheels pattern No6

1:35 M4 Sherman road wheels, pattern No. 6 is a resin accessory set from PANZER ART. It is not a model of the tank but replacement road wheels for building a Sherman in 1:35 scale.
In stock
11.56 €
Kits-WorldKW3D13210171:32

1:32 Supermarine Spitfire Mk.I/Mk.II/Mk.V 3D Full colour Instrument Panel

Supermarine Spitfire Mk.I, Mk.II and Mk.V, a 3D full-color instrument panel 1:32 is a relief decal set for the cockpit of a large kit.
In stock
13.56 €
Mark IDMF72021:72

1:72 Unarmed Hawker Hurricanes Mk.I / Mk.IIc Decals

1:72 Unarmed Hawker Hurricanes Mk.I / Mk.IIc Decals is a decal sheet from Mark I aimed at Hurricanes operated without armament.
In stock
8.76 €
Star DecalsSD35-C13611:35

1:35 StuG-Abt # 3. Generic insignia and unit markings for the Sturmgeschütz units.

Decals 1:35 - insignia of Sturmgeschütz units, part 3 bring unit markings for modelers who build German assault guns.
In stock
8.36 €
KelikRSK35-00201:35

1:35 KOZAK-2 UKRAINIAN MRAP 3D DECALS FOR ICM KIT

1:35 KOZAK-2 UKRAINIAN MRAP 3D DECALS is a set of three-dimensional decals from the Kelik brand for a model of the Ukrainian Kozak-2 armored vehicle. It is not a kit but an accessory.
In stock
10.36 €
ETA dioramaETA1821:35

1:35 Coronavirus signs

Coronavirus signs 1:35 brings signage from the time of the pandemic into a diorama. The accessory from the maker ETA diorama sets a civilian scene into a clearly defined period.
In stock
3.96 €
ReskitRS32-03231:32

1:32 AIM-7F Low Vis Sparrow III missiles (4pcs) (F-4, F-5, F-15, F-16, F-14, F-18)

Reskit 1:32 AIM-7F Sparrow III missiles, Low Vis (4 pcs) is a 3D printed resin set of four air-to-air missiles for models of American fighters in 1:32 scale.
In stock
11.56 €
SX-ArtSXA350871:35

1:35 M109A2 DOHER (AVF Club)

A shape-ready masking set for a model of the M109A2 Doher self-propelled howitzer in 1:35, measured on the kit from the AFV Club brand.
In stock
5.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.