20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:48 F-117A ADVANCED kabuki masks for Academy

F-117A ADVANCED level kabuki masks, 1:48 are pre-cut New Ware masking parts for the Academy kit. The middle level of the range reaches further than the BASIC variant.

Scale1:48
Manufacturer New Ware
Product EAN8591111248648

Responsibility details are not available.

8.76 €
7.24 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

F-117A kabuki masks, ADVANCED level, 1:48 (New Ware)

A set of pre-cut kabuki masks for a 1:48 model of the Lockheed F-117A from the manufacturer Academy. ADVANCED is the middle of the three levels in which New Ware runs this set, alongside the basic BASIC and the most extensive EXPERT. The level sets the range of masking, so ADVANCED reaches further than the basic variant. It is not an aircraft model but a masking accessory to one, and this set is cut specifically for the Academy kit.

The real subject

The Lockheed F-117A Nighthawk was an American attack aircraft with reduced radar signature. The airframe was made up of flat panels, so-called facets, which deflect the radar signal away from the source. Power came from two turbojets without afterburners and the aircraft carried its weapons in an internal bomb bay. It had no armament for air combat and was sent out mostly at night. It lasted in US Air Force service from the 1980s until 2008.

Use and tips

The parts are die-cut on a carrier film. Lift them with the tip of a scalpel or with tweezers, transfer them to a clean, degreased surface and press the edges down carefully with a toothpick. Spray in thin coats and at lower pressure so that the paint does not run under the edge. On glazing lay the interior color first and only then the outer shade. Lift the mask off shortly after it has dried, while the layer is flexible. The matte faceted surface of the F-117A brings out every unevenness, so give the preparation of the undercoat its time as well.

Who the set is for

  • Builders of the 1:48 F-117A model from the manufacturer Academy
  • Modelers for whom the basic range of masking is not enough
  • Those who want sharp paint edges without cutting tape by hand
  • The middle choice between the BASIC and EXPERT levels

This is a masking accessory, not a kit. The aircraft model, the paints and the glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is the middle of the three levels in which New Ware runs the set. The level gives the range of masking, so ADVANCED reaches further than BASIC. The specific list of parts is given by the manufacturer.

The levels are usually bought one at a time, according to how closely you want to mask the model. Their ranges differ, though, so compare what you need before you buy.

It is cut for the 1:48 F-117A model from the manufacturer Academy. On kits from other manufacturers the shapes differ.

Shortly after the paint has dried and at an angle to the surface, not straight up. The edge then stays sharp and the clear part is not damaged.

Last seen

New WareNWAM09971:48

1:48 F-117A ADVANCED kabuki masks for Academy

F-117A ADVANCED level kabuki masks, 1:48 are pre-cut New Ware masking parts for the Academy kit. The middle level of the range reaches further than the BASIC variant.
In stock
8.76 €
Star DecalsSD35-C13971:35

1:35 Frundsberg #2 - 10 SS-Panzer Division - SdKfz 250 'NEU' Versions - SdKfz 250/1, SdKfz 250/3, SdKfz 250/7

The set Frundsberg 2 - 10 SS-Panzer Division - SdKfz 250 NEU Versions in 1:35 scale holds markings for the late hull in the versions SdKfz 250/1, SdKfz 250/3 and SdKfz 250/7.
In stock
8.36 €
TakomTKM21921:35

1:35 Sd.Kfz.181 Pz.Kfw.VI.Ausf.E Tiger I Experimental Project 3 in 1

A kit of the German heavy tank Tiger I, that is, the Pz.Kpfw.VI Ausf.E with the Sd.Kfz.181 designation, in 1:35 scale. According to the name the package is listed as a 3 in 1 variant.
In stock
Price to be confirmed
BlackSnake ModelUKR1/09-061:9

1:9 Ukrainian Soldier 06

A figure of a Ukrainian soldier in the large scale of 1:9, listed in the line under number six. The figure measures roughly nineteen centimeters.
In stock
87.96 €
1:48 Dassault Rafale C/M cockpit set HOBBY BOSS
-20 %
Favorite
AiresAIR48861:48

1:48 Dassault Rafale C/M cockpit set HOBBY BOSS

Aires 1:48 Dassault Rafale C/M cockpit set is a resin replacement cockpit for the single-seat Rafale in the C and M versions. It is not an aircraft model but an accessory to a plastic kit.
In stock
32 €25.60 € You save 6.40 €
Entry Grade Naruto - Uchiha Sasuke-25 %Stock ClearanceFavorite
BandaiBAN65567

Entry Grade Naruto - Uchiha Sasuke

An assemblable figure of the character given in the name. The plastic is divided by color, the parts click together, and neither paints nor glue are needed to finish.
Last one!
30.76 €23.08 € You save 7.68 €
Yamamoto Model PartsYMP35111:35

1:35 German

German What If tank optics in 1:35 scale is an accessory set of parts for building hypothetical versions of German armored vehicles. It is not a vehicle kit but an accessory fitted into a model that has already been built.
In stock
10.76 €
UMUM6951:72

1:72 Armored Train

A plastic kit of an armored train in 1:72 scale. The particular real subject and the number of cars are to be found on the box and in the manufacturer's instructions.
In stock
103.96 €
1:48 F/A-18A++ 3D-Printed & coloured Interior on decal paper (Hasegawa)-25 %Stock ClearanceFavorite
Quinta StudioQD482841:48

1:48 F/A-18A++ 3D-Printed & coloured Interior on decal paper (Hasegawa)

Quinta Studio 1:48 F/A-18A++ is a pre-colored interior on decal paper. It is applied over a gloss surface and replaces the flat cockpit parts. Intended for the Hasegawa kit.
4 leftof 5
21.56 €16.16 € You save 5.40 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.