Masks for the PZL W-3A Sokol in 1:72 scale (Peewit) are pre-cut self-adhesive stencils for the glazing. It is not a helicopter kit.
Responsibility details are not available.
Note that this is not a model of the helicopter but a set of masking stencils. The Czech brand Peewit makes pre-cut self-adhesive masks for plastic models, typically for cockpit frames and wheels. On a helicopter the cockpit glazing is large and reaches down into the floor beneath the pilots' feet, so there are many frames and a mask saves a considerable part of the work.
The PZL W-3 Sokol is a Polish twin-engine multipurpose helicopter, the first machine of its class developed in Poland. It serves for troop transport, for medical and rescue duties and as a patrol and training machine; the W-3A version is the certified variant, which met civil regulations and made operation outside military service possible. The helicopter is used by a number of operators in Poland and abroad, and its silhouette with the tail boom and the four-blade rotor is among the typical images of Polish aviation.
Apply the masks to clean, degreased glazing and press them down with a stick or tweezers so that no paint runs under the edge. Spray the frames with the interior color first and only then with the exterior shade. Apply the paint in several thin coats; a thick coat tears when the mask is lifted. Remove the mask while the paint is merely dry, not fully cured. Finish the cockpit interior before you set the glazing in place, because once it is seated you can no longer reach it.
The set contains masks only. The kit, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!