1:144 A-4E/F Skyhawk - 20mm gun barrels and Refueling Probe Boom

1:144 A-4E/F Skyhawk - 20mm gun barrels and Refueling Probe Boom

5.16 €
Add to Cart

1:144 A-4E/F Skyhawk - 20mm gun barrels and Refueling Probe Boom

A-4E/F Skyhawk – turned metal 20 mm barrels and a refueling probe 1:144 is a detailing accessory from the Polish manufacturer MASTER that replaces the plastic parts of a kit with precise turned metal ones.

Scale1:144
Manufacturer MASTER
Product EAN8591111000000

Responsibility details are not available.

5.16 €
4.26 € without VAT
4 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A-4E/F Skyhawk – metal 20 mm barrels and a refueling probe 1:144 (MASTER)

This is not a kit of the aircraft but a metal detailing accessory for a Skyhawk model in 1:144 scale that you have already bought. The set contains turned brass parts: the barrels of the onboard cannon of 20 mm caliber and the probe for refueling in flight. Turned metal has hollow muzzles on the barrels and an accurate circular cross-section over the whole length, which cannot be achieved with injection-molded plastic in such a small scale. Plastic barrels are moreover usually split, with flash from the mold, and bent already on the sprue, whereas a metal part stays straight.

The real subject

The Douglas A-4 Skyhawk was a light single-engine carrier-based attack aircraft of American design, taken into service in the middle of the 1950s and operated for several decades with the Navy and with a number of foreign users. The A-4E and A-4F versions are among the well known modernized forms with a more powerful engine and extended equipment. The armament consisted of built-in cannon of 20 mm caliber, and refueling in flight was provided by a fixed probe at the front of the fuselage.

Fitting and tips

Cut the plastic barrel off with a sharp knife or a file as close to the surface as possible, level the remainder and if need be widen the hole with a drill bit of a corresponding diameter. Glue the metal part in with cyanoacrylate glue (super glue): ordinary cement for plastic does not hold on metal. Apply it drop by drop, ideally with a toothpick, so that the glue does not run into the muzzle. Degrease the metal with alcohol before painting and use a primer, as otherwise the paint holds badly on the smooth surface. The probe is thin, so glue it on at the end of the build, to keep it from bending during handling.

Who the set is for

  • Modelers who want to raise the level of detail of a small model in 1:144
  • Builders who are bothered by split and inaccurate plastic barrels
  • Those interested in the carrier-based aircraft of the US Navy
  • More experienced modelers used to working with super glue

This is an accessory, not a model of the aircraft. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is an accessory set of turned metal parts that you use on a Skyhawk model in 1:144 scale you have already bought.

Super glue based on cyanoacrylate. Ordinary cement for plastic will not join metal, because it does not work on the principle of melting the material.

Yes, degrease it with alcohol and spray it with a primer. Without a base coat the paint rubs off smooth metal easily.

A turned part has hollow muzzles, a perfectly round cross-section and it does not twist. A plastic barrel tends to be split, with a mold seam, and often bent already on the sprue.

Last seen

MASTERAM1440401:144

1:144 A-4E/F Skyhawk - 20mm gun barrels and Refueling Probe Boom

A-4E/F Skyhawk – turned metal 20 mm barrels and a refueling probe 1:144 is a detailing accessory from the Polish manufacturer MASTER that replaces the plastic parts of a kit with precise turned metal ones.
In stock
5.16 €
MASTERAM321211:32

1:32 German WW I machine gun Spandau LMG 08/15 (2 pcs)

Two pieces of the German aircraft machine gun LMG 08/15 of the First World War in 1:32 scale, in metal. An accessory for a model, glued with super glue.
In stock
23.96 €
MASTERAM321311:32

1:32 A-4 Skyhawk - Colt Mk12 20mm autocannon barrels

Master barrels for the Colt Mk12 20 mm cannons of the A-4 Skyhawk are turned metal barrels in 1:32 scale which replace the plastic barrels in a model. It is not a model but an accurate metal accessory.
In stock
9.16 €
MASTERAM320031:32

1:32 German aircraft machine gun MG 131 barrels (2pcs)

A pair of turned metal barrels of the German MG 131 aircraft machine gun of 13 mm caliber in 1:32 scale from MASTER. A faithful replacement for the plastic parts from a kit.
In stock
11.96 €
MASTERAM481051:48

1:48 Aero L-29 Delfin - Pitot Tubes

MASTER Aero L-29 Delfin - Pitot Tubes from MASTER - turned metal (brass) replacement pitot tubes for the L-29 model in 1:48 scale. It is not an airplane model, but a precise metal accessory.
In stock
5.16 €
LACILAC7200511:72

1:72 Handley Page HP137 Jetsream - Landing Flaps (for Amodel Kits)

Landing flaps for the Handley Page HP137 Jetstream in 1:72 scale, made for the Amodel kits. The model gains extended high-lift devices and with them a sense of movement.
In stock
18.76 €
AberABRA320191:32

1:32 Set of 2 barrels for British Browning .303 aircraft machine guns with flash hiders

Aber: a set of two metal barrels for British Browning .303 aircraft machine guns with flash hiders replaces the simplified plastic parts on models in 1:32 scale.
In stock
11.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.