A photo-etched detail set for the Dewoitine D.520 in 1:144 scale. It refines the places that cannot be produced by injection molding in such a small scale.
Responsibility details are not available.
The Dewoitine D.520 was a French single-seat fighter of the late 1930s, an all-metal low-wing monoplane with retractable landing gear and an enclosed cockpit. It was powered by a Hispano-Suiza V12 engine of the 12Y series and the armament consisted of a cannon on the propeller axis supplemented by machine guns in the wing. In its day it was among the highest-performing French fighters and it stayed in service after 1940 as well.
These are photo-etched metal parts that add to a kit the details that injection molding cannot manage. In 1:144 scale the difference between a thicker plastic shape and thin metal is visible at once, especially on surfaces that are meant to look like sheet metal. Photo-etching also suits places where a plastic part would break if it were thinned.
Separate the parts with a sharp blade a little way from the fret tab and sand the remainder with a fine file. Take the bends over the edge of a metal ruler or in a bender, so that they stay sharp. Wash and degrease the surface before gluing. Cyanoacrylate glue in a minute amount is used; apply a base coat to the metal and only then the shade.
The set is for modelers who are looking for truer detail in a small scale and do not mind working with small metal parts. The kit, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!