Four ADV5.0 CS rims in 1:18 scale from Hobby Design for the 20-inch diameter. A forged five-spoke design for supercars.
Responsibility details are not available.
According to the name the set holds four ADV5.0 CS rims in 1:18 scale for the 20-inch diameter. It does not replace a kit of a car, it adds to one: it goes on in place of the wheels from the box where a model is meant to have the look of a custom conversion. The material of the castings is stated on the box by the manufacturer.
The ADV5.0 belongs to the forged wheels of the American brand ADV.1, which builds on custom sizes and on a markedly curved face. The five-spoke pattern is the basic one in this family: the spoke comes out of the center as a wide arm and narrows toward the rim, so a large open area is left between the spokes. The 20-inch diameter is usual with this styling on supercars and on modified sedans of the upper class.
A curved face is apt to be flooded with paint, so spray from the center outward and in two passes rather than one heavy one. A matte anthracite finish tends to be more rewarding on this type of wheel than gloss, because it lets the shape of the spoke stand out. Before you seat the wheels for good, check the alignment and that the rim does not touch the inner side of the wheel arch. Bring out the bolt holes with a thin dark line, otherwise they will disappear on the large area.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
