1:20 - 24 Oxygen Sensor

Top Studio Oxygen Sensor is a detail part for 1:20 and 1:24 scale: a miniature lambda sensor for fitting into the exhaust system of a racing car model.

Scale1:20
Manufacturer Top Studio
Product EAN8591111242820

Responsibility details are not available.

5.96 €
4.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Top Studio Oxygen Sensor for 1:20 and 1:24 scale

This is not a kit but a detail accessory. It replaces or supplements the simplified part of the base kit with a single, precisely made element: the oxygen sensor, also called a lambda sensor, which on a real car sits in the exhaust manifold and measures the oxygen content of the exhaust gases. The name gives the range 1:20 to 1:24, that is, the most common sizes of single-seater and road racing car models. The part is added to the model together with the lines and connectors of the engine and exhaust area.

What it does on the model

The sensor is one of those details that immediately catch the eye on a larger model. While an ordinary kit treats the exhaust manifolds as smooth tubes, a model with the sensor and its line fitted looks technically convincing even in a close-up photograph. The part is fitted into a pre-drilled hole in the manifold, or into a hole the modeler drills himself according to documentation for the particular car.

Installation and painting tips

Try the place for the sensor dry first and drill the hole with a micro drill bit gradually, in smaller diameters, because the thin wall of the manifold cracks easily. Bond the part with super glue (cyanoacrylate) applied in a minimal amount with a pin; ordinary plastic cement may not hold on a different material. Degrease the part before gluing. Choose a contrasting paint scheme: the body of the sensor is usually metallic and the line dark, and once dry a light dark wash helps to bring out the transition between the sensor and the manifold. If you are painting the manifold in metallic shades or heat tints, fit the sensor last so that it does not get dirty.

Who the part is for

  • Builders of single-seater and racing car models in 1:20 and 1:24 scale
  • Modelers who detail the engine and exhaust area and are not satisfied with the kit part
  • Those who build a model for a display case or for a contest, where small technical detail is judged
  • More experienced modelers used to working with small parts and super glue

The accessory is supplied unpainted. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a separate detail part that is fitted to a model already under construction or finished. The base kit has to be bought separately.

The name gives the range 1:20 to 1:24. The sensor is small enough to suit both sizes of model.

Check the number of pieces and the material on the box.

We recommend super glue (cyanoacrylate) applied in a minimal amount. Ordinary polystyrene cement may not hold the joint.

Last seen

Top StudioTD232621:20

1:20 - 24 Oxygen Sensor

Top Studio Oxygen Sensor is a detail part for 1:20 and 1:24 scale: a miniature lambda sensor for fitting into the exhaust system of a racing car model.
In stock
5.96 €
T-ModelTK-350021:35

1:35 Wooden Tips for SSys / SSkra

Wooden decking for the SSys and SSkra cars in 1:35 from T-Model. The railway car and the equipment carried are not included.
In stock
9.56 €
GAS HANSGH-NB03008

Hexagonal Nut 1.0 mm

The GAS HANS hexagonal nut 1.0 mm is a set of miniature imitations of hexagonal nuts for superdetailing models and dioramas.
In stock
3.96 €
SX-ArtSXA360631:35

1:35 35 Holographic film FV510 Warrior (MENG)

Holographic film for imitating the vision blocks and periscopes of the FV510 Warrior combat vehicle in 1:35 scale, for the kit from the manufacturer Meng.
In stock
7.16 €
SX-ArtSXA360591:35

1:35 Holographic film Kornet-D gaz233014 (ZVE)

1:35 Holographic film Kornet-D is an accessory for a model of a light wheeled vehicle with an anti-tank missile system. A quick way to add detail to a model without paints and without abrasives.
In stock
5.56 €
SX-ArtSXA360581:35

1:35 Holographic film T-72B1 / Obj.172 T-72 Ural

Holographic film T-72B1 and Object 172 T-72 Ural 1:35 from SX-Art replaces the blind plastic glass of the instruments with a clear glossy surface on two variants of the T-72 tank at once.
In stock
5.56 €
SX-ArtSXA360611:35

1:35 Holographic film AMX-13/75 (TAKOM)

Holographic film for the optics of the AMX-13/75 1:35 from SX-Art replaces the plastic vision blocks and periscopes of the French light tank with clear parts that do not have to be painted. Target kit: Takom.
In stock
5.56 €
SX-ArtSXA360571:35

1:35 Holographic film BMP-3 (TRUMP)

SX-Art 1:35 BMP-3 holographic film is a set of self-adhesive film for imitating the glass of the vision ports and the optics of the vehicle. It is a refinement accessory, not a model.
In stock
5.56 €
SX-ArtSXA361231:35

1:35 Holographic film BMP-3 green (ZVE)

Holographic film BMP-3 green 1:35 from SX-Art imitates the glass of the optics of the Soviet infantry fighting vehicle. The green shade is given in the name itself.
In stock
7.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.